Hi,
I have a GOG20 LA-171P Rev1a board. Long story short, this laptop came to me not powering on. I found a short to ground on the KB9022. I replaced the KB9022 and programmed it with a CH431A. The laptop worked for about three days but then stopped powering on again.
I discovered that a small chip, the SY8388BR, was shorted to ground. I replaced it, and once again, the KB9022 was shorted to ground. I replaced it again, but this time, the pad for pin 1 on the mainboard fell off and wasn't connected to anything. I decided to program the KB9022 with the same BIN file as...
