---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
This one is a real pain.changed the screen finally got image machine boots but after entering the service tag got an error(wrong service tag) witch is weird restarted it and no boot no image again.
for tl866 it give me a schematics for so and si, in this chip are 4 pin for data In out - what to solder?
IO0
IO1
IO2
IO3
and this chip dont have wp reset hold pin assigned
i used
MOSI: Master Out Slave In (data output from master); PIN 5 TL866 TO PIN 2 IO0
MISO: Master In Slave Out (data output from slave) pin 4 tl866 to pin 5 io1 - when i use this - all bin was 000000
tried this variant to
MOSI: Master Out Slave In (data output from master); PIN 5 TL866 TO PIN 5 IO0
MISO: Master In Slave Out (data output from slave) pin 4 tl866 to pin 2 io1 - same result all bin memory 0000000
Comment