Announcement

Collapse
No announcement yet.

Apple Macbook Pro A1990 15" - T203 or CH341 with Mina ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • AccountSaver
    replied
    Originally posted by sherifu View Post

    Yes, i know it s a bypass with checkm8, mina, hfz, etc..I wrote in a hurry, however some posts i can t acces, especially the threas where mr Stephen moved the discussion about T2 chip. I m ok with a bypass also and we wait for a future solution.
    I understand what you are saying. But ,same goes here. I'm still with a "laptop" that is with locked icloud .Not even bypassed.

    Leave a comment:


  • kevingill
    replied
    I find it interesting that even with a bypass, where you have full access to the MacBook, yet still can't remove the previous owner details.

    Leave a comment:


  • sherifu
    replied
    Originally posted by AccountSaver View Post

    No there isn't and if you search a little bit more you will see it's not an unlock it's a bypass with checkm8 . It means that you will pay the money and you will be only to "open" the account/system ,if you will need any erasure in the future or restore factory etc. you will need to unlock it again.

    There isn't still any vaiable option to do it.
    Yes, i know it s a bypass with checkm8, mina, hfz, etc..I wrote in a hurry, however some posts i can t acces, especially the threas where mr Stephen moved the discussion about T2 chip. I m ok with a bypass also and we wait for a future solution.

    Leave a comment:


  • AccountSaver
    replied
    Originally posted by sherifu View Post
    Hello guys, i was reading the other days about an unlocking method for A1990 with low bridge. I have iBridge 2,3 (and version 5,3..i don t know whats that) acording to checkm8. Does anybody knows a cheaper software unlocking A1990, i would prefer not to spend 100 USD with them unless i have no other option. Thank you!!
    No there isn't and if you search a little bit more you will see it's not an unlock it's a bypass with checkm8 . It means that you will pay the money and you will be only to "open" the account/system ,if you will need any erasure in the future or restore factory etc. you will need to unlock it again.

    There isn't still any vaiable option to do it.

    Leave a comment:


  • AccountSaver
    replied
    Originally posted by shlomim412 View Post

    meaning? no longer available?

    i was able to get version 1.0.2 is that the correct one?
    No longer available, nor you will be able to find anything interesting.
    The only person i know that knows a little bit more is Stephen ..

    Leave a comment:


  • sherifu
    replied
    Hello guys, i was reading the other days about an unlocking method for A1990 with low bridge. I have iBridge 2,3 (and version 5,3..i don t know whats that) acording to checkm8. Does anybody knows a cheaper software unlocking A1990, i would prefer not to spend 100 USD with them unless i have no other option. Thank you!!

    Leave a comment:


  • shlomim412
    replied
    Originally posted by AccountSaver View Post

    Short answer ? No.
    meaning? no longer available?

    i was able to get version 1.0.2 is that the correct one?

    Leave a comment:


  • AccountSaver
    replied
    Originally posted by shlomim412 View Post
    Hello
    where is possible to get the minaT2 activator to unlock? or the tool to read the previous owner deails?

    thank you!
    Short answer ? No.

    Leave a comment:


  • shlomim412
    replied
    Hello
    where is possible to get the minaT2 activator to unlock? or the tool to read the previous owner deails?

    thank you!

    Leave a comment:


  • toshyou
    replied
    Re: Apple Macbook Pro A1990 15" - T203 or CH341 with Mina ?

    Originally posted by anhbanxoi View Post
    Touch ID and Truetone are not related to the serial # in bin file.
    i see,, how about hard ware procedure in activation lock for t2?

    Leave a comment:


  • anhbanxoi
    replied
    Re: Apple Macbook Pro A1990 15" - T203 or CH341 with Mina ?

    Originally posted by toshyou View Post
    Yes its true you can change serial in bin but touch id will not work ryt? how about the truetone?
    Touch ID and Truetone are not related to the serial # in bin file.

    Leave a comment:


  • toshyou
    replied
    Re: Apple Macbook Pro A1990 15" - T203 or CH341 with Mina ?

    Originally posted by QBC View Post
    mdm t2 you can change serial in bin and mdm gone no needed mina
    Yes its true you can change serial in bin but touch id will not work ryt? how about the truetone?

    Leave a comment:


  • QBC
    replied
    Re: Apple Macbook Pro A1990 15" - T203 or CH341 with Mina ?

    Originally posted by toshyou View Post
    question: MDM issue can fix via flash of file bin from mina?
    mdm t2 you can change serial in bin and mdm gone no needed mina

    Leave a comment:


  • toshyou
    replied
    Re: Apple Macbook Pro A1990 15" - T203 or CH341 with Mina ?

    question: MDM issue can fix via flash of file bin from mina?

    Leave a comment:


  • kevingill
    replied
    Re: Apple Macbook Pro A1990 15" - T203 or CH341 with Mina ?

    There some posts on this forum that show the screen as it's powering up into recovery. If it gives an estimate of how long to load, then you won't be able to unlock by software.
    However, you can still pay for activation bypass services.

    Leave a comment:


  • gadgetfix
    replied
    Re: Apple Macbook Pro A1990 15" - T203 or CH341 with Mina ?

    Master Liu screwed me goooood - I saw in a video he was using a t200 to read rom so i purchased one, but watching the video over there are no links to the actual software he uses. It looks like there is still no proper hardware method to unlock T2. I heard on older bridge OS it is possible. Is there a way we can find out what bridge OS a mac is using if it is activation locked?

    Leave a comment:


  • vinay badola
    replied
    Re: Apple Macbook Pro A1990 15" - T203 or CH341 with Mina ?

    how to remove icloud lock from A1990

    Leave a comment:


  • alassane.dontavius
    replied
    Re: Apple Macbook Pro A1990 15" - T203 or CH341 with Mina ?

    Originally posted by c00l View Post
    Hello guys,

    Mina let's you boot the T2 ramdisk and it connects to device via ssh without registering the sn first. Is it possible to get ssh access from terminal to the locked device? Tried to ssh via known ports but device refuses connection, tried to capture also the traffic from localhost and I see it uses a port 2088 but I think that is the application port and also does not work for ssh. Can anyone maybe try to see if have any luck? Thanks
    mina does not use ssh on his ramdisk tool, its webdev method, and btw the unlock method got patched now on bridge 7.4 mina reported bug to apple and collected money form apple for the bounty program

    Leave a comment:


  • c00l
    replied
    Re: Apple Macbook Pro A1990 15" - T203 or CH341 with Mina ?

    Originally posted by kevingill View Post
    I'd tried the same route. I thought if another tool allows me to connect to the MB I could manually ssh and then do what I need to do. Not sure how these tools connect if that's the case? Perhaps a port scanner could be used to find which port is available?
    Port scanner can't find anything, I think that only way is to debug iproxy to check which port is mapped, or maybe a port mirror to usb-c but that's more difficult because I think it works only for network ports.
    Another way is to simulate the ramdisk boot process since all images are already accessible on mina app, but this would need some skills.

    Leave a comment:


  • kevingill
    replied
    Re: Apple Macbook Pro A1990 15" - T203 or CH341 with Mina ?

    Originally posted by c00l View Post
    Hello guys,

    Mina let's you boot the T2 ramdisk and it connects to device via ssh without registering the sn first. Is it possible to get ssh access from terminal to the locked device? Tried to ssh via known ports but device refuses connection, tried to capture also the traffic from localhost and I see it uses a port 2088 but I think that is the application port and also does not work for ssh. Can anyone maybe try to see if have any luck? Thanks
    I'd tried the same route. I thought if another tool allows me to connect to the MB I could manually ssh and then do what I need to do. Not sure how these tools connect if that's the case? Perhaps a port scanner could be used to find which port is available?

    Leave a comment:

Working...
X