-
-
hello
Dell G5 15 5500
motherboard code : 19753-1.
orginal dump deleted...
Service tag : 8FG4103
the bios in the forum works but it turns on automatically and the fan is constantly spinning at high speed.
i cannot save service tag and cannot apply ALT+F to working in normal mod and fan run on full speed
please clean me working orginal dumpLeave a comment:
-
Leave a comment:
-
-
-
Not working, I repair bios by ogryginal Dell EXE, and clear ME using FIT. Laptop turning ON correcly. Problem is i cant Save Service TAG and laptop always turning ond manufactured mode i show Alt+ F Key to skip that.Leave a comment:
-
Unfortunately it doesn't work properly. After programming, the FAN starts at 100% power and restarts. A few restarts and the DELL logo appears and keeps restarting. Then, after a few shutdowns, the diagnostic display appears. I have been waiting for a long time, but the Dell logo is no longer displayed.Leave a comment:
-
Someone can help me? I flash dump i previus post, laptop turning on but i cant saved Service Tag and always turning on Manufacturing mode.Leave a comment:
-
-
-
-
Re: Dell G5 15 5500 bios needed
Help, lost the dump. Service Tag 2T4VZZ2, need help on bios, all of the above not working, processor I7 10875h video card 2060. Platform selek mlk n18e 19753-1 fjt96$laLeave a comment:
-
Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,... -
Hi, I hope some one has some advice for me. I searched the forums but didn't see anything relevant. I acquired two identical Dell 9010 Mid Tower computers from a business office upgrade (they were going to throw them out). Both of them have the same motherboard (00F82W). One of them works flawlessly. The other one had a corrupted BIOS. I tried flashing numerous main BIOS and EC files from the internet, but none of them worked. I decided to copy the main BIOS and EC from the working 9010 computer and successfully flashed the corrupted BIOS. This got the computer able to boot again and run norm...04-23-2025, 04:30 PM -
Hey everyone,
I recently bought a Dell G15 5515 with an AMD Ryzen 7 5800H and 3060 RTX. The BIOS chip on it was dead, and my hardware guy replaced the chip. After that, everything was working fine.
The BIOS is currently at version 1.22.1, and I wanted to update it. I downloaded the latest BIOS version from Dell Support using my ST: FQZMYJ3, but when I tried to run it, it says "unsupported system." I asked my tech guy what he did, and he said he took the chip from another board and flashed it onto mine.
When I check the BIOS using the F12 menu Flash... -
Hi,
Could someone help trying to unlock this BIOS, seems that Dell have changed the layout of new Dell Pro 8FC8 bioses from checking HXD - 4000 bits do not need changing, only 2000. However after FF the section starting from '01000' upto 2000 bits and then soldering the chip back it seems that the microchip on the motherboard is recovering the bios back to original settings after first boot. Has anyone found a way to crack this extra layer of security Dell have implemented? Seems both HP and Dell have upped bios security to match Lenovo by implementing extra measures on a separate... -
Hi, I have a problem while updating the bios 1.27.0. After that the display went off & the bios states as Dell Inspiron 3505 in the F2 boot > bios > Device when I plug into a secondary monitor. As I don't have any experience in bios, request you to please help me to flash the Vostro bios as they share the common motherboard (GDI53 LA-K037P).
Model: Dell Vostro 3405
Tag:F0B1YF3
CPU:Ryzen 3500U
Thanks in advance
Leave a comment: