HP MINI110c-1110ez bios dump need

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kadi144
    Badcaps Veteran
    • Aug 2015
    • 690
    • algerie

    #1

    HP MINI110c-1110ez bios dump need

    hi guys

    l need a dump bin format of HP MINI110c-1110ez

    with many thanks to all
  • Bonzas
    Badcaps Veteran
    • Jan 2018
    • 471
    • Indonesia

    #2
    Re: HP MINI110c-1110ez bios dump need

    post your backup here, or your serial number. someone will help

    Comment

    • kadi144
      Badcaps Veteran
      • Aug 2015
      • 690
      • algerie

      #3
      HP MINI110c-1110ez BIOS

      salut tous

      i need a dump for HP MINI110c-1110ez
      i trying many bios but no result and i m sure that is bios problem

      here is the bios backup
      Attached Files

      Comment

      • kadi144
        Badcaps Veteran
        • Aug 2015
        • 690
        • algerie

        #4
        Re: HP MINI110c-1110ez BIOS

        the motherboaed is:

        6050A2290801 - MB- A03-001

        Comment

        Related Topics

        Collapse

        • Habble7
          I need a BIOS dump for the Samsung S49CG934SU monitor
          by Habble7
          The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.

          Suspected Cause:
          I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.

          Troubleshooting Attempts:
          ...
          05-22-2025, 07:28 AM
        • Citymin
          NT955XED (Samsung Galaxy Book2 Pro - 15.6) BIOS dump file Request
          by Citymin
          Hi all,

          My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
          The charging red LED lights up, but the charging screen doesn't show any indication.
          When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
          (I've tried removing the battery and resetting the device, but the issue persists.)

          NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
          PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
          S/N : 5RNK9FFT70...
          Today, 05:12 AM
        • DynaxSC
          MSI PRO B660M-G DDR4 - real bios dump from board needed (no stock bios)
          by DynaxSC
          Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).

          I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...
          11-17-2023, 10:56 AM
        • cekcons
          g1 assassin Rev 1 bios dump - main and backup needed
          by cekcons
          g1 assassin Rev 1 bios dump - main and backup needed
          main and backup ic dead so i cant post corrupt bios cause its 01 all over.
          thanks
          01-23-2024, 03:26 AM
        • MDSI
          HP OMEN 17-an012nf BIOS dump with EC (DAG3BAMBAF0 REV : F)
          by MDSI
          Hello,

          I'm requesting a full BIOS dump (including EC firmware) for an HP OMEN 17-an012nf laptop.

          Details:
          Model : HP OMEN 17-an012nf
          Motherboard Part Number : DAG3BAMBAF0 REV : F
          Serial Number (S/N) : 5CD7280D51
          BIOS chip : Winbond W25Q64VSIQ
          Programmer : EZP2023+
          Issue : The motherboard is not powering on. Only the 5V rail is present. The 3.3V rail is missing because EN1 on the SY8286B remains stuck at 0V. This signal is driven directly by the EC/SIO. I replaced the 3.3V regulator and confirmed it's working.

          I already...
          07-28-2025, 07:11 AM
        • Loading...
        • No more items.
        Working...