NM-A481 kbc connection

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kesmeseker
    Senior Member
    • Jan 2015
    • 121
    • turkey
    #1

    NM-A481 kbc connection

    hi. NM-A481 kbc connection ite.
    for example :NM-A281 KB_pins=30 (JKB3) PD0=6 PD1=11 PD2=13 PD3=18 PD4=14 PD5=10 PD6=17 PD7=15 BUSY=4 STB=12 AFD=1 INIT=8 SLIN=9 KSI4=5 KSI5=7

    thansk.
    Tags: None
    • SMDFlea
      Super Moderator
      • Jan 2018
      • 22293
      • UK
      #2
      Re: NM-A481 kbc connection

      Settings from genuine vertyanov jig:

      NM-A481 KB_pins=30 (JKB1) PD0=7 PD1=11 PD2=13 PD3=18 PD4=14 PD5=10 PD6=17 PD7=15 BUSY=4 STB=12 AFD=1 INIT=8 SLIN=9 KSI4=5 KSI5=6
      All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

        Comment

        • kesmeseker
          Senior Member
          • Jan 2015
          • 121
          • turkey
          #3
          Re: NM-A481 kbc connection

          thanks

            Comment

            Previous template Next

            Related Topics

            Collapse
            • budwich
              Lithium 12v tool battery charger... no negative connection?
              by budwich
              I have a drill and battery but no charger so I bought a "universal charger" 120ac in ... 12vdc out (not really universal in lithium world). Anyway it has three contacts, positive, negative and "T" (temperature sensor). I connected those contacts to the contacts on the battery. No charging happened and only the status light is on (green solid) which the label indicates "100% charged".... but the battery isn't near that at around 9v and dying. There doesn't appear to be any difference whether the battery is connected or not. I got suspicious and pulled the...
              03-18-2025, 09:12 AM
            • Demetrio87
              Legion t 5 front audio panel connection problem
              by Demetrio87
              Hi everyone, I hope someone can help me solve my problem, I have the case of a legion t5 where I have installed an asus tuf gamig a520m-plus motherboard, the audio connection cable on the case is an F_audio connector with 14 PIN , on my new motherboard the connector is a 10-pin AAFP, I saw that there are adapters on sale but at the moment I have no way of having them available in a short time, I made several attempts and managed to listen from the front headphones, only that there are some problems, the headphones are only detected if the microphone is connected, I definitely got confused with...
              F audio MB T5
              6 Photos
              12-08-2023, 12:06 PM
            • Nikan.e
              Inno 3d RTX2070 not detected - no I²C connection
              by Nikan.e
              Greetings and Salutations!

              I have encountered a faulty GPU — an Inno3D RTX 2070 Twin. There was a shorted MOSFET on the Vcore rail.
              The faulty DrMOS was removed, and the burned PCB area was milled away.
              All voltages are now good, but the GPU is not being detected.

              I found that the CS pin of the BIOS (GPU) is not being pulled low, and thus, the GPU isn't detected.
              I wanted to measure the SM_Data and SM_Clock, but to my surprise, there is no connection at all.
              I thought these pins were used for communication during startup?!?

              On all...
              03-30-2025, 07:21 AM
            • spleenharvester
              Synology MR2200ac mesh router, UART connection - login details?
              by spleenharvester
              This particular unit powers up, LEDs behave normally, but broadcasts no SSID, will not mesh with any other routers. Plugging in an ethernet cable from a Windows laptop results in "unidentified network" with an autoconfigured IP address and no response to pinging 192.168.1.1.

              I was able to log into serial/UART by connecting the 6-pin header to the GPIO on a Raspberry Pi Zero W (GND to GND, TxD to RxD, RxD to TxD, no connection between +3.3V as it is supplied on both sides) using Minicom, command:

              Code:
              sudo minicom --baudrate 115200 --device /dev/ttyS0
              ...
              09-02-2024, 01:19 PM
            • ktmmotocross
              Lenovo Legion 5 Pro 16ACH6H bad crystal?, but now wont program. connection lost after 5 seconds
              by ktmmotocross
              Hello.
              Have this Lenovo Legion 5 Pro 16ACH6H that came with no start, only powerbutton light. i reflash bios and ec. no change. i replace one of soc cpu crystals and laptop start to work. but when i assemble it, keyboard not work. so i reflash back bios but when i try to reflash ec i get write error and now i connect to it but always read/write error and connection lost after 5 seconds.
              IC is ITE8277E - 256 programmer is vertyanov. i try to change back that crystal but still the same

              Lenovo Legion 5 Pro 16ACH6H
              NM-D562 rev3.0
              sn- PF31EESB

              any ...
              01-22-2024, 05:33 AM
            • Loading...
            • No more items.
            Working...