Microsoft Surface Pro 7 / 7+ NEED BIOS. HELP!

[asd90011]

Can someone please help me remove the bios uefi password?
I bought a bad screen pro7+ from ebay and replaced it with a brand new one and found out that the bios is locked with a password and I can't use usb to boot it up Please help me!
Surface pro7+ SN:021945714553

[hoaca388]

Can someone please help me remove the bios uefi password?
I bought a bad screen pro7+ from ebay and replaced it with a brand new one and found out that the bios is locked with a password and I can't use usb to boot it up Please help me!
Surface pro7+ SN:021945714553

Try

[JuginKrebs]

Hello Community,

I'm experiencing an issue with my touchscreen. My Surface had a broken display, but the touchscreen was working perfectly fine. After replacing the display, the touchscreen initially worked on the new one, but a day later, it stopped functioning completely. It doesn’t even work in the UEFI menu anymore.

I’m not sure if an update was downloaded in the meantime, or if it just stopped working on its own. I've tried several solutions: resetting the tablet multiple times, reinstalling the drivers, and even doing a full recovery reinstallation of Windows from a USB stick.

Could performing an ME Clean help? The touchscreen issue isn’t mentioned as symptom in guides on this forum.

Attached is the BIOS dump of my Surface Pro 7, in case anyone has any ideas on what might be causing this.

Surface Pro 7 i5/256GB/8GB
Model:1866
S/N: 058020604853

[peste]

Hello Community,

I'm experiencing an issue with my touchscreen. My Surface had a broken display, but the touchscreen was working perfectly fine. After replacing the display, the touchscreen initially worked on the new one, but a day later, it stopped functioning completely. It doesn’t even work in the UEFI menu anymore.

I’m not sure if an update was downloaded in the meantime, or if it just stopped working on its own. I've tried several solutions: resetting the tablet multiple times, reinstalling the drivers, and even doing a full recovery reinstallation of Windows from a USB stick.

Could performing an ME Clean help? The touchscreen issue isn’t mentioned as symptom in guides on this forum.

Attached is the BIOS dump of my Surface Pro 7, in case anyone has any ideas on what might be causing this.

Surface Pro 7 i5/256GB/8GB
Model:1866
S/N: 058020604853

try this..

https://www.badcaps.net/forum/showthread.php?t=104153

[Jogy2]

К сожалению, это ошибка ME. Тачскрин не работает.

Sorry for my late reaction.
Thank you for your Answer, but can you say me what is a Me Issue, and what i can do to fix it?
I have read the Bios again and i think the other one is to small with 2 Mbyte, the new one have 4Mbyte

[Jogy2]

Im so sorry , i am stupid again i read the whole time the wrong flash. I testet the file by me analyzer, but i think it was encryptet. Now i have the right one.

Issue: at start only 3 seconds Windows logo
Model: Surface 7 Pro 1866
SN: 051464104753

Thx

Please merge this with my post below.

[JuginKrebs]

try this..

https://www.badcaps.net/forum/showthread.php?t=104153

Hello again,

I followed this guide ("https://www.badcaps.net/forum/troubl...e-fix?t=104153") (in my case, it's number 2 (-> "Integrated Sensor Hub Supported" is set to "YES")), and I cleaned the ME following this guide (https://www.badcaps.net/forum/troubl...cleaning-guide).

My problem is that in step 5, I need to overwrite the new "ME Region.bin" with the existing "ME Region.bin" in the decomp folder, but I don’t have an original "ME Region.bin" in the decomp folder at all. I tried just placing the new ME Region in the decomp folder, but now I’m stuck in a boot loop (Windows logo for 3-5 seconds, then the Surface turns off).

What am I doing wrong?

Thanks in advance for your help!

[bulldog uk1]

I am in need of someone to clean my password locked bios
Microsoft Surface Pro 7 1866
sn/047745103953
Bought from ebay

Much appreciated thanks

[Geentle Man]

PLEAS I NEED FRIMWERE ORGINEL BIOS FOR MICROSOFT SURFACE PRO 7+ (1960) SN:005471920453 THANK YOU

[leninmdz]

Please help, my Surface Pro 7 (Windows 10) turned off while updating the BIOS, now it shows the Windows logo and stays in that state.
Model: 1866
SN: 022557712053

[Alex Baños]

Hello from Spain.
My Surface Pro 7 is blocked in logo screen for a few seconds and then turn off. I`ve tried to flash spi chip with a bios bin take from the here, but the result is thee same. I believe that my bios is corrupted, but I can´t manage to fix ME region.
Can anybody help me to clean ME Region from my bios Surface Pro7?
I`ve tried with ME Inject and with Fit tools, but ever with error message?
Surface M 1886
S.n. 010285504053

[Alex Baños]

Sorry the bin archive and the screen from ME

[Alex Baños]

Peste..you are my last hope...jaja, Great Star Wars...

[zuu327]

surface pro 7 1866 SN 006169693853 pleace unlock password this file

[zuu327]

surface pro 7 1866 SN 006169693853 pleace unlock password this file

Can someone please help me remove the bios password

[hoaca388]

Can someone please help me remove the bios password

Try

[zuu327]

Try

ITS WORKING VERY WELL THANKS A LOT

[zuu327]

Try

HI; IN THIS FILE HAVE A PROBLEM WHEN I AM RE INSTALL WINDOWS ASKING THE GOOGLE ACCOUNT CAN YOU PLEASE HELP ME

[hoaca388]

HI; IN THIS FILE HAVE A PROBLEM WHEN I AM RE INSTALL WINDOWS ASKING THE GOOGLE ACCOUNT CAN YOU PLEASE HELP ME

I tried removing the windows key. You must replace the key.

[virusok]

Hi, can someone help change the fan behavior , somehow changing bios on a surface pro 7 1866