You don`t have to use the exact version. Lenovo support have configured ME firmware updates, the latest one for the x13 Gen4-21ey is 16.1.35.2557
16.1.35.2557 Corp LP unconfigured firmware attached
-
-
Hi all, want to shere a python scrip i made to combine and seperate laptop with 2 bios chip,
might be usefull, theres a python scrip (source code ), portable and installer version all work and function the same, use 1 you like
Attached FilesLeave a comment:
-
-
Hello
can anyone please provide Flash Image Tool 16.1.35.2545 or something works in place of it?
Thanks in advanceLeave a comment:
-
Hi, can anyone please provide Flash Image Tool 16.1.25.2091?
Thank you!​Leave a comment:
-
-
Hello friends. I need firmvare pack for 11.8.93.4323, but I can't find it anywhere. Can someone help me?Leave a comment:
-
-
Hello I have a question
I replaced 10th gen intel cpu and cleaned me using fitc now board post fine but now not detecting ssd, what causes that and what setting do I need to do ?
This happened me on several intel me cleaning and I want to figure out why
Thanks in advanceLast edited by tomodachi; 04-22-2025, 07:21 AM.Leave a comment:
-
If you have to clean the ME firmware on **some microsoft surface models the touchscreen can stop working.
** Some models do not need this fix.
*You should install the latest updates from microsoft,including the driver packs before assuming there is a hardware problem.* - See Post #2
EDIT: If nothing else works try this fix - https://www.badcaps.net/forum/showpo...8&postcount=40
Always check a working dump from the same model using FIT.If the working dump default setting for "Integrated Sensor Hub Supported" is set to "NO"... -
i know a tool https://github.com/MuertoGB/MacEfiToolkit is capable of SN change and Clean ME but not updating EFI Version of the BIN file. is there a guide or a BIOS structure to update the firmware??...03-06-2024, 01:34 AM -
Hello to everyone ,
This is my first post here, and i would like to share with you a small story in case you can help me.
Docker Type-C Gen 2 - Model 40AS. Was given to me by a friend for free ,but with the problem that you cannot use the video output ports.
All ports work , USB , Ethernet, Type C ... but HDMI + Display Port don't work
I searched on reddit and google for problem similar to that, and a LOT of people had fixed this problem by updating the firmware. So i tried , i searched and found 1.1.13 utility and 1.1.20 utility that can help...02-10-2024, 02:07 PM -
Hi guys.
I've got a Ubiquiti US-8-150W POE switch which has issues with updating the firmware.
Turned out to be a bad EEPROM chip. It would read the firmware and work as normal, but failed to write new firmware to it.
So I took off the chip and read on EEPROM and saved it. Wrote to old chip and failed to write
Got New chip and writes good.
THE PROBLEM...
It fails to fully load the firmware, POE lights fail to work during g firmware test during load. I'm suspecting bad EEPROM Read.
Does anyone have a Good Firmware I can have?... -
Hello Badcaps Community,
I purchased a preowned AOC monitor that is not working and out of warranty. It was sold as not working. I am looking for guidance on self-repair. In particular, I am after the firmware for the monitor. At the end, I have included monitor model information and links to pics and vids of the issue.
The problem is that it will not display a picture on any of its inputs. And the on-screen menu does not appear. The power button works properly. It powers on with the remote as well. But the on-screen menu does not appear, even when not connected to any...
Leave a comment: