-
-
Hello,
I have here Hp elitebook 830 G6 not powering on, I've read the bios and i Believe it's corrupted by comparing it to others files from here, i tried other file downloaded from this thread and the the charging indicator just flashing orange light no power.
SN: 5CG0353RHS
my original files attatched here
Any help Please!
Comment
-
If you have found our forum useful please consider supporting us. Subscribe for a small monthly fee and receive extra benefits including our bios, boardview & schematic archive.
Subscribe to support us. It only takes 1 minute:
https://www.badcaps.net/settings/subscriptionsComment
-
I have Hp elitebook 830 G6 powering on,BUT AFTER 6 SECOND GO OFF . ALL POWER GOOD I . I FLASHED BIOS BUT SAME ISSU ANY ONE HAVE A SOLUTION ?Comment
-
If you have found our forum useful please consider supporting us. Subscribe for a small monthly fee and receive extra benefits including our boardview / schematic archive.
It only takes 1 minute:
https://www.badcaps.net/settings/subscriptionsComment
-
Can someone help with removing the BIOS admin password on an HP EliteBook 830 G6? I tried using RCUnlocker, but it says the chip is wrong.
Model: HP Elitebook 830 G6
SN: 5CG0135WHVComment
-
If you have found our forum useful please consider supporting us. Subscribe for a small monthly fee and receive extra benefits including our boardview / schematic archive.
It only takes 1 minute:
https://www.badcaps.net/settings/subscriptionsComment
-
hello, need a help regarding hp endpoint secuirity controller issue on hp elitebook 830 g6. i have already removed the bios password but endpoint secuirity controller issue popped up. please help me to fix this. thanks.
okiwi-6050a3059101-mb-a01(a1)
hsn-i22c
prod id-5pe04av
s/n-5cg9426n3v
Comment
-
-
i followed the instructions and it states for 830 g6 will be this 18F4048-1919FFF-25FB8 but in my tool i did not find it. i am using uefi tool 0.28. anyway thanks for helping me with this. i flashed this file on my main bios but its booting on manufacture mode now. could you please help me with this?Attached FilesPremium supporters get full download access and other benefits.
Comment
-
-
Hi guys,
If someone would be able to provide some expertise, I'd be very grateful.
BIOS Corruption - Cause
So I managed to corrupt my machine by installing linux and enrolling custom secure boot keys. I did choose to enroll the Microsoft keys as well, to prevent any potential bricking due to 3rd party drivers from HP being signed with those keys.
After doing that, and rebooting(it did boot, powerLED, fanspin etc.), the laptop did not give any video output on the LCD or video connectors. I think I was able to get in BIOS and trigger the beeper by pressing ESC.... -
Greetings badcaps community,
I havent done this for a long time and want to start it all again, after some evil and annyoing illness.
So I apologize in advance, if some phrases might sound a bit like gibberish or illogical to you.
Im trying my best to fully describe what I plan to achieve and hope I was choosing the right sub-forum for my new adventure.
I have a Elitebook 820 G1 and a Elitebook 840 G2 here.
These ask for a password when entering the BIOS, but boot just fine from the internal SSD.
I learned that desoldering...10-29-2024, 06:03 AM -
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
Hi i received a HP elitebook G6 that had a The HP Endpoint Security Controller error when booted but 3 enters later you could use it in windows, i thought maybe a bios update helps...... i used the HP tool (it did not want to update from device manager,,, someting i did not even knew worked) after the update it bricked the laptop.
i get 7 blinks on the capslock and thats it. i desoldered the chips front and back. and made a dump. i tried one bios posted here for the 16M and the 32Mb bios.. but it would not turn on or give an error code. so now i reflashed it back in its failed state... -
Hello everyone,
I am requesting urgent assistance to unbrick my laptop, a rebranded TongFang GK7MRFR chassis. The laptop is completely dead following a faulty in-OS EC flash attempt.
I have successfully used a CH341A programmer and can read/write/verify both flash chips, but using my backups/extractions has failed to restore power. The root cause is likely a corrupted Intel Management Engine (ME) region or an incompatible EC/BIOS pairing. System & Hardware Details- Barebone / Chassis: TongFang GK7MRFR
- MB: MB: GK5MP5X V1.0 Prod :GK5MRFV10T04201310281
- Rebrand: PC Specialist
Comment