this laptop came from client that lied to me how the laptop cracked, he sayd he had water damage, the board had very little tracks of liquid and the mosfet from video memory power supply was missing and a small hole in the board, originaly i thought that was the only problem of it but after repairing the power supply i nodest the the laptop in loop reboot with a missing auxiliary votage on processor and no image , just lef turns on for a few second than turns off and again in loop, from this i deduce that this was it iniatial probem, and if it had made a bios update is it posible that the dmi area from original bios to re affected? if yes this means i have to make and EC aswell right? which i cant program this ec cause i dont have the adaptor for keyboard plug programming ffs..
i have found a post where u made a bios and give that bios and the ec for the same model, i modified the dmi of it anow the charging led is turning on but power wont....
i have found a post where u made a bios and give that bios and the ec for the same model, i modified the dmi of it anow the charging led is turning on but power wont....
Comment