Hello i have this hp elitebook 850 g6 mb won't turn on just chager blink amber-white and i believe that i road it corrupted
Sn:5CG0435ZB4
mb: hp 840 g6 6050A3022501-MB-A01
Sn:5CG0435ZB4
mb: hp 840 g6 6050A3022501-MB-A01
-
-
Hello,Can you unlock bios password on this 840 G6,please
MB : 6050A3022501-NB-A01
SN : 5CG9309RGLComment
-
Use RCUnlocker https://www.badcaps.net/forum/troubl...locker?t=98539
-
-
PLEASE HELP ANY BODY,
REMOVE BIOS PASSWORD, MY MAIN BIOS OK, I TRY ANOTHER BIOS, BUT BIOS PASSWORD HAS ON EC BIOS,
I TRY ANOTHER EC BIOS , BUT END POINT SECURITY MESSAGE SHOW, I ATTCHED MY ORGINAL FILE
HP 840 G6
S/N-2TK949039P
MB-6050A3022501Comment
-
If you have found our forum useful please consider supporting us. Subscribe for a small monthly fee and receive extra benefits including our boardview / schematic archive.
It only takes 1 minute:
https://www.badcaps.net/settings/subscriptionsComment
-
I have an hp elitebook840 g6 comes on the metre then voltages goes down instantly as shown below on the video
below are the bios file both 32mb and 16mb bins
pliz help
Comment
-
If you have found our forum useful please consider supporting us. Subscribe for a small monthly fee and receive extra benefits including our boardview / schematic archive.
It only takes 1 minute:
https://www.badcaps.net/settings/subscriptionsComment
-
HI ANY ONE HELP ME TO FIX THIS?
HP Elitebook840g6
prod ID 7KK19UT#ABA
SN# 5CG94018Y0
LAPTOP turn off while updating bios. Now laptop on and comes display and write intel management error bla bla then restart trying to update firmware and restart automatically like loop.
i will upload the two backup file any one pls to fix this
thanks in advanceComment
-
Thanks Its working fine. but when i add Feature byte its showing this message " invalid feature byte crc failed" How to fix this?
now the system in manufacture modeComment
-
hello guys, could anyone clean this bios, its showing corrupt intel me error in the start
sn# 5CG91328ND
Comment
-
hi , I need the elitebook 840g6 bios dump, I am attaching the corrupt original bios, (SOME TIME POWER ON AND BOOT OK, SOME TIME NO POWER, )
thank you very much
HP Elitebook 840 G6
ProdID 4WG32AV
SN# 5CG04536XCComment
-
Hello. Can you help clean ME region, tried about ten diferent FIT versions - all opens dump with error (Unable to open file. reverting to default configuration)
HP Elitebook 840 G6 - with slow boot
ProdID: 7WL60UP#ABA
S/N: 2TK9500B58Comment
8
-
Hi,
i need some help :-/
i deleted in Bios the Admisnistrator password with old password, but after it didn't allow me to modify the User password. Now i can't boot, enter the bios or do anything. It asking at boot for password, old password don't work...
Could you please remove all password related stuff from this bios. A hate Asus....
Thanks in advance!... -
Hi, i have a Panasonic Cf-W5 with the bios password, I tried remove cmos but problem didnot solve.
I uploaded the picture after remove cmos battery, It look like this is a Phoenix bios. The bios dump file in the link i attached
Please help me remove bios password.
Thank you so much -
I have NEC PC-VKT16GZG6 laptop with a BIOS/supervisor password.
It uses a Winbond 25Q128JVSQ 2021 BIOS chip, from which I successfully saved a backup using the NeoProgrammer tool. I created two backups and checked both with HxD—they were identical.
Could you please help me remove or reset the password?
The “LENOVO BIOS AUTO-PATCHER for Supervisor Password Removal” tool returns the following error:
“Backup1.bin is corrupted or does not contain a valid dump.”
DMI System Serial Number: 12007211A
DMI Motherboard Serial Number: K9NK050417... -
Sublect line continuation: ... Jaguar IDS PC aka Panasonic
>Read BIOS guides, methods, resources and tools
>
Ack
>Try the method at BIOS guides, methods, resources and tools before requesting help
>
Ack
>Explain you were not able to succeed with the methods at BIOS guides, methods, resources and tools
>
python ./main.py "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.BIN" --output-dir "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.txt"
------------------------------------------------... -
Hi BadCaps team,
I’m asking for a bit of community help with a Proline notebook that’s stuck with a Power-ON (BIOS) password. The laptop has very limited info available and I suspect it may be a local (South African) Proline board. Thought I’d check here in case anyone has seen this one before.
What I have:- Model: Proline NoteBook V146GNK
- Board: SU_GN100_MB_V12_20231120A
- Serial: GN10Q12124205W1588
- Notes: 12V main board. Very little documentation available.
What I’d like to request:- Has anyone dealt with this Proline board before or seen matching BIOS/firmware
Comment