hp probook 650 g1 BIOS

[Elsid79]

try it, it should work
HP Probook 650 G1
Inventec 6050A2566401-mb-A03

Discrete 216-0842121 (HD 8750M)
Intel Haswell i5-4200M
PCH DH82HM87 (SR17D)
SMSC MEC1322-NU
Winbond W25Q128FVSQ (16MB)

[anil2014]

Re: hp probook 650 g1 BIOS

can anyone help me with passwords remove on this hp 650 g1 bios

[DanielDacko]

Re: hp probook 650 g1 BIOS

can anyone help me with passwords remove on this hp 650 g1 bios

If all the options in bios are grayed out, enter admin blank password, save and reset and enjoy.

[anil2014]

Re: hp probook 650 g1 BIOS

thank you very much it work i owe you one

[KOMANDO]

Hello to everyone i need the bios PROBOOK 650 G1

Please to everyone ined the bios.
PROBOOK 650 G1 6050A2567001-ODD-A02

[peste]

Re: Hello to everyone i need the bios PROBOOK 650 G1

Please to everyone ined the bios.
PROBOOK 650 G1 6050A2567001-ODD-A02

https://www.badcaps.net/forum/showthread.php?t=103570

posts the original laptop bios

[KOMANDO]

Re: Hello to everyone i need the bios PROBOOK 650 G1

Hi.im not shure if his is ok.Thanks

[peste]

Re: Hello to everyone i need the bios PROBOOK 650 G1

Hi.im not shure if his is ok.Thanks

the bios is not ok..if you use the CH431a programmer, try one of these two programs..don't use the clip because you might get errors, remove the bios chip from the motherboard before writing or reading..if you don't have how do you desolder the chip, solder wires between the chip and the programmer ... here is a video ... more details can be found on the internet ..
https://www.badcaps.net/forum/showpo...6&postcount=10
https://www.badcaps.net/forum/showpo...04&postcount=7

https://www.youtube.com/watch?v=DWWigscuQDY

try making a new copy and post ..

[KOMANDO]

Re: Hello to everyone i need the bios PROBOOK 650 G1

HI Peste.thanks for the reply.this bios i now is not ok,bikoz the laptop not working good.Is only power on bat nothing on the screan,same time is turning on same time no.I try to update the bios bat hi say is password on it.yasterday i try another bios from bad,is not the same model is the model with 301 number last and a03 not a02 like this .and now its say the mashine is not in comitate state.Sory for my english.