Hi
need lenovo x201 tablet dump pls
motherboard/lcm-3 09236-1
need lenovo x201 tablet dump pls
motherboard/lcm-3 09236-1
-
This specification for the Lenovo ThinkPad X1 Tablet (3rd Gen) Hybrid (2-in-1) can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the X1 Tablet (3rd Gen) boardview and X1 Tablet (3rd Gen) schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification,...09-06-2024, 08:47 AM
-
Friends. I beg you to help me in this situation.
Lenovo X240 with a video problem. Native Intel drivers are not installed,
after installation, a black screen. It works with the standard Microsoft driver.
Understanding that there are problems with the video core,
I ordered a motherboard from Lenovo X250.
The laptop turns on, starts up, there is no image on the internal display.
The image is output to the external monitor.
I ordered another motherboard from Lenovo X250.
The laptop turns on, starts up, there is no image on the internal display.
... -
Hi everyone,
Iām looking for a 2 MB BIOS dump for a Lenovo IdeaPad 5 16ARH7H / Legion 5 with mainboard NM-E471 Rev. 2.0.
The BIOS chip is a Winbond W25Q16FW (1.8V, 2MB) and it's completely unresponsive / bricked. I tried recovery via USB but no success. Now I want to reflash it externally using a CH341A programmer.
I already found 32MB dumps (e.g. from Vinafix and Badcaps), but they are too large for the chip ā and the last 2MB in those files are just FF FF FF....
ā What I need:- A working 2MB BIOS dump
- Matching NM-E471 Rev. 2.0, e.g. JY575
-
Hello everyone,
OK, so here is my issue.
This Lenovo B470 motherboard I am troubleshooting died and I identified it is the discrete Nvidia graphics chip that has lost it's ways!
So I removed it and now I am trying to change this motherboard to use UMA graphics, but I am having an issue interpreting the attached diagram. I have a 10K resistor in at the R2013 position and another one at the R2012. R2010 and R2011 are empty.
The motherboard starts, the fan spins but no display. It turns off by itself. I restart it and it does start but stays on...08-12-2024, 02:01 PM -
I see the voltages on the motherboard battery connector at 3.3V, below 4V they are not stabilized and rise and fall.
Where is the problem?
Thanks...09-21-2023, 02:46 AM