Re: Remove_SMM... UEFI.
Enter key
Enter key
-
-
Re: Remove_SMM... UEFI.
please pach this this file
lenovo x250
ATTACH]246040[/ATTACHLast edited by SMDFlea; 04-01-2023, 07:27 AM.Comment
-
Re: Remove_SMM... UEFI.
Please help me patch this Lenovo L490 file. I tried Auto-patcher but there is no display with a beep at 1 second intervalLast edited by SMDFlea; 04-01-2023, 07:27 AM.Comment
-
Re: Remove_SMM... UEFI.
Please help with a Lenovo P52 dump.
With the patched dump, the laptop shows a black screen and plays a melody sound that translates to code 0285 (TPM issue or so). I also tried to clean the ME Region as well and same result with code 0285.
BIOS dump version is 2021 - could it be the issue?
Attached is the original dump. If I put back the original dump, it turns on fine but with SVP pass.
Any help is appreciated.Last edited by SMDFlea; 04-01-2023, 08:02 AM.Comment
-
Re: Remove_SMM... UEFI.
can you help me pacher my dump from Lenovo Thinkpad W540 4th
https://drive.google.com/drive/u/0/my-driveComment
-
Re: Remove_SMM... UEFI.
good afternoon, help to patch, pleaseLast edited by SMDFlea; 04-01-2023, 08:02 AM.Comment
-
Re: Remove_SMM... UEFI.
[QUOTE=bandak;1077399]good afternoon, help to patch, please[/Comment
-
Re: Remove_SMM... UEFI.
Hello,
I'm not sure if my request fits this topic or should i create a new one.
Anyway, I have a Lenovo T520 with Computrace enabled.
I tested a few things and came to the conclusion that Computrace enable/disable bit is located in 24rf08 IC. I read my ic and downloaded another dump with computrace disabled from the internet copied my serial number to that dump and flashed my ic.
Computrace was gone, but now I have a 0189 RFID error each time I boot the laptop up, so flashed back to my original dump and everything went back to normal.
I wonder if anyone knows in which address of the dump computrace enable/disable bit is stored ?.
In the attachment I posted a dump from my laptop with computrace enabled.
That would be great if anyone could help.
ThanksLast edited by SMDFlea; 04-01-2023, 08:02 AM.Comment
-
-
Re: Remove_SMM... UEFI.
@TTR
You can use the 24rf08 eeprom dump you found and change CompuTrace setting to the different options, on each change then read 24rf08 eeprom again and you will know what's the offset where the setting is stored.Comment
-
Re: Remove_SMM... UEFI.
help me pass bios X390Last edited by SMDFlea; 04-01-2023, 08:02 AM.Comment
-
Re: Remove_SMM... UEFI.
Hello, can you please help with the password on x390?Last edited by SMDFlea; 04-01-2023, 08:02 AM.Comment
-
Re: Remove_SMM... UEFI.
Hello, could I get help with patch for t470s
s/n pc0sfmdf
Thanks BruceLast edited by SMDFlea; 04-01-2023, 08:02 AM.Comment
-
Re: Remove_SMM... UEFI.
Hello again, did not know if I was supposed to zip the file. so here is orig bin with extension changed to .rar s/n pc0sfmdf.
Thanks again BruceLast edited by SMDFlea; 04-01-2023, 08:02 AM.Comment
-
Re: Remove_SMM... UEFI.
hi
how to clear svp error
plz help meComment
-
Hi, i have an ASUS PRIME Z590M-PLUS board, which had an shorted Z590 chipset. I have succesfully exchanged the chipset to a factory new one, however there is a serious problem with the Intel Management Engine (later on: ME) not beeing activated after the chipset device replacement.
For lower chipset families (on ASUS boards) it worked to program the oldest bios version into the SPI rom, and the bios had activated the Management Engine itself by default - there was a message on the screen prior booting - "BIOS is updating Management Engine ..... . Do not shut down to prevent... -
Hi guys.
I am very new to this business and i have some questions. Maybe someone can help me further.
I have a 2015 Intel NUC NUC6i3SYH and for some internet and office the computer works perfectly. Lately it has been bugging me a bit on and off. Then I saw there is a UEFI update from Intel and I thought if I put it on, the problems might be gone, but unfortunately the update didn't go through. The screen stayed black and after waiting for a while nothing happened, I had to pull the plug at some point. Of course, the NUC then failed to boot!
... -
Hi, I would appreciate your help with the following problem.
I have a Fujitsu laptop AH562 witn a BIOS-UEFI problem since I converted the HDD to a SSD. For more details on the paltop go to the following link:
http://support.fujitsupc.com/CS/Port...srch=TECHSPECS
After copying the HDD to SSD with ALtiris utility provided with the Kingston SSD and replacing the HDD with the SSD the laptop went into a startup loop with no screen display and only the disk LED flashing twice per second. I waited for approximatly 2h and then stopped the laptop... -
I'm stumped with this one; it was a dropoff freebie. Blank hard drive, uefi/gpt booting from USB to install OS, never gets to installer startup screen.... Win10 21H2 BSOD with stopcode 0xc000021a. BIOS settings are what they should be; legacy boot off, secureboot off. Firmware updated to latest version (A28).
It will UEFI boot & install mint 21 just fine. Will also legacy boot & install win7 and win10 just fine as well...just won't USB UEFI boot to the 10 installer...no clue as to why!
System: Precision T1650
CPU: Xeon E3-1220V2
RAM: 16GB PC3-10600U... -
Hi there, recently my kid decided to mess with the uefi, don't even know how he got there and incredibly placed an Administrator Password (What's new!!!!). Of course now he doesn't know what he typed in, result, as soon as laptop boots up a password is asked. Now, I've been working with computers all my life, but my knowledge about this new UEFI chips is very limited. I've taken it out and with a rom programmer I can see a bunch of stuff in it. Does anyone know the location where the passwords are stored?
The UEFI Chip is a Gigadevice GD25B64C and the orginal rom dump is attached.
...
Comment