I need bios dump for Microsoft Surface 4

[dqtech]

thanks

[Nova10]

Hallo Bro,
i need remove Passwort from this backup for microsoft surface pro 4
Thanks in advanced

[SMDFlea]

RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
https://www.badcaps.net/forum/troubl...before-posting

You MUST:

• Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.

[kot9]

pleas need dump 1953 MB rev:3.01 microsoft surface 4

[SMDFlea]

Post your backup and laptop serial number https://www.badcaps.net/forum/troubl...before-posting
.Whats the problem ?

[kot9]

hello . no backup no serial number . 25Q128JW not worked . I have new chip but no dump. 😐

[TomWay]

need clean me region

Surface Pro 4 (1724)

[peste]

need clean me region

Surface Pro 4 (1724)

read the rules..https://www.badcaps.net/forum/troubl...before-posting

post the S/N, , the motherboard model, etc.

[TomWay]

sry i forgot to add information

Surface Pro 4 - 128GB M 4GB
Device Serial Number: 020173163253

[crowntoy99]

sn 1724 256 009156762753

this bios no display any one fix

[TomWay]

try that file is repair if not working check hardware lcd flex or lcd

[crowntoy99]

try that file is repair if not working check hardware lcd flex or lcd

thnak you bro its working

its logo stuck

[TomWay]

thnak you bro its working

its logo stuck

go to bios and check security tab install new system

[crowntoy99]

go to bios and check security tab install new system

cannot boot uefi mode or its logo stuk sam time re boot

[arashmoayyedizadeh]

hello dear experts
i have a surface pro 4 with hang on logo problem
i found a bios on the internet that passes the logo and enters the bios but unfortunately the touch screen not working
touch screen is tested on another machine and its ok
i tried to clear me my original bios with the method that dear peste provided with no success
would you please help me with this situation
thank you so much

surface pro 4 1724 256GB
sn: 071913754953

[peste]

hello dear experts
i have a surface pro 4 with hang on logo problem
i found a bios on the internet that passes the logo and enters the bios but unfortunately the touch screen not working
touch screen is tested on another machine and its ok
i tried to clear me my original bios with the method that dear peste provided with no success
would you please help me with this situation
thank you so much

surface pro 4 1724 256GB
sn: 071913754953

try.. 11.8.86.3877_outimage.rar

[arashmoayyedizadeh]

try.. [ATTACH]n3567771[/ATTACH]

Thanks alot
i will test it on tuseday and will give you feedback

[arashmoayyedizadeh]

try.. [ATTACH]n3567771[/ATTACH]

thank you so much bro
sorry for late feedback
hangs on logo
nothing changed

[arashmoayyedizadeh]

try.. [ATTACH]n3567771[/ATTACH]

update!!
i decided to ignore the me part and only extracted bios region from the rom i found on the internet and replaced in my original dump with hex editor
only bios region and nothing else
the machine is working and in bios menu touch is working also
the problem is bitlocker is activated and i cant boot to windows
the owner doesnt have any important data so now im installing windows
lets see what will happen next
i hope no more troubles
i dont know why but it seems if you touch me section in any way the touch will stop working

[arashmoayyedizadeh]

Windows installs and when you start microsoft driver package gives error
in uefi menu pc information is wrong
i will keep on trying

[arashmoayyedizadeh]

would you please help me replace dmi info from my original dump

[arashmoayyedizadeh]

finally solved !!!
i found a bios in forum that peste was modded to clear password and it was a fully working bios
downloaded that file and extracted bios region by uefi tool (extract as is) and replaced in my original bios with hex edditor
pc information in uefi menu is ok now (of course serial number is for that machine not mine but apparently its not important
all the drivers installed and device is fully functional
in my case changing me in any way didnt work
hope this could help someone
again thank you peste for your time and effort
i really appreciate