Thanx but no display beep 2 time and restart but i send vinafix sites and his remove the password but system is booting manufacture programming mode error how to solve thanx ala_borbe.
I own an HP Probook 450 G3
BIOS version is N78 Ver. 01.14 08/08/2016
Motherboard is 827026-601 and read Model X63 near SoDIMM but I didn't take part the laptop to see the exact model and rev info.
Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz
Intel(R) HD Graphics 520 & AMD Radeon R7 M340
I created the dump file with CH341A clip programmer without desoldering the chip using AsProgrammer 1.4.1
I'd appreciate if you could remove the password without altering UUID.
I own an HP Probook 450 G3
BIOS version is N78 Ver. 01.14 08/08/2016
Motherboard is 827026-601 and read Model X63 near SoDIMM but I didn't take part the laptop to see the exact model and rev info.
Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz
Intel(R) HD Graphics 520 & AMD Radeon R7 M340
I created the dump file with CH341A clip programmer without desoldering the chip using AsProgrammer 1.4.1
I'd appreciate if you could remove the password without altering UUID.
Comment