I have tried the above bin files, first two from imranomi did not work, one was too small, other correct size but programmer would not open. The third one opened and I was able to program it in, however, it still asks for the power-on password.
Yes, I did try all the passwords possible from bios-pw.org and none worked.
I reprogrammed the laptop to its original BIOS bin:
Is the password elsewhere? The laptop shows an AMD BGA chip next to the bios chip.
I have tried the above bin files, first two from imranomi did not work, one was too small, other correct size but programmer would not open. The third one opened and I was able to program it in, however, it still asks for the power-on password.
Yes, I did try all the passwords possible from bios-pw.org and none worked.
I reprogrammed the laptop to its original BIOS bin:
Is the password elsewhere? The laptop shows an AMD BGA chip next to the bios chip.
Which kbc it uses?? If it is programmable kbc, then password may be stored there like kb9012 etc.
According to the schematics, it is indeed a KB9012QF-A3 LQPF128 14X14. How would I reprogram it? I have a TL866A.
I found this youtube video, and he says that I need an RT809F. Looks hard, but if things were easy, any fool would do them. https://www.youtube.com/watch?v=SSeqlM3_LW8
Its not that hard with Rt809F though svod is easier. You need to get any one of them or some similar programmer. Once you have the programmer in hand, members here will help you out. Dont worry about that part. Go ahead and buy one as this tool is a must for laptop repair these days as all new models have kbc programmed.
I had forgotten about this computer, customer never picked up and now I am finally trying to "fix" it. I have the ch341a programmer but I am not sure about the data input and output pins. According to the first website using a bus pirate, MISO = DO and
MOSI = DI. Problem is that my programmer has MOSI and MIOS. Just to make sure, is MOSI still DI and MIOS=DO?
I am using the windows program from the win-raid forum too.
Recently locked myself out so any help would be greatly appreciated. I've found lots of sites that help with the removal using the service tag but none that use the system disable code.
Dell M531R-5535
Tag: J6XPQY1
System Disable Code: 6B9838CB75F9AB76
Thank you very much for your time in advance because I realize you simply do not have to.
Recently locked myself out so any help would be greatly appreciated. I've found lots of sites that help with the removal using the service tag but none that use the system disable code.
Dell M531R-5535
Tag: J6XPQY1
System Disable Code: 6B9838CB75F9AB76
Thank you very much for your time in advance because I realize you simply do not have to.
try pass: 55200139 After type pass press and hold left Ctrl and hit Enter twice
Comment