Lenovo G500 VIWGP/GR LA-9632P

[arslansharif]

Re: Lenovo G500 VIWGP/GR LA-9632P

thanks u

[O.Szilard]

Re: Lenovo

backup old bios and try this

Thanks!

[djeghamyacine]

Re: Lenovo G500 VIWGP/GR LA-9632P

thanks

[ali0606]

Re: Lenovo G500 VIWGP/GR LA-9632P

thanks for sharing.

[mohammed mohan]

Re: Lenovo G500 VIWGP/GR LA-9632P

thank you

[peste]

obrigado amigo fucionou

in English please...

[M4n0l0307]

Re: Lenovo

backup old bios and try this

Thanks Friend !

[Bekir soy]

Can this file be loaded into crisis recovery?

[SMDFlea]

Can this file be loaded into crisis recovery?

No it can`t. Try the attached file, its been renamed with the right recovery name. Put it on a flash drive, press fn + b or try other key combinations https://www.bios-mods.com/wiki/CRISI...y_Combinations

[Bekir soy]

No it can`t. Try the attached file, its been renamed with the right recovery name. Put it on a flash drive, press fn + b or try other key combinations https://www.bios-mods.com/wiki/CRISI...y_Combinations

I tried this file and name but it didn't work. Crisis recovery starts but it doesn't start the process via the USB2.0 port.

[Bekir soy]

No it can`t. Try the attached file, its been renamed with the right recovery name. Put it on a flash drive, press fn + b or try other key combinations https://www.bios-mods.com/wiki/CRISI...y_Combinations

Let me tell you about the bios corruption incident. I wanted to mod my bios but I couldn't, then I tried to open the hidden menu with the setvar command on the machine running grub2, I found the parameters, but I opened it with 0x1, but the setting was not active in the bios, so I said let me find the internal GPU parameter, from there I set the amount of internal GPU ram to 1GB, then the PC would not boot.

[SMDFlea]

Let me tell you about the bios corruption incident. I wanted to mod my bios but I couldn't, then I tried to open the hidden menu with the setvar command on the machine running grub2, I found the parameters, but I opened it with 0x1, but the setting was not active in the bios, so I said let me find the internal GPU parameter, from there I set the amount of internal GPU ram to 1GB, then the PC would not boot.

So , now you will need an SPI programmer to flash a new bios.