Hello everyone,
I’m repairing an HP OMEN 17-ck0048tx with motherboard DA0G3LMBCF0 Rev F.
GPU is RTX 3060 (GN20-E7-A1)
Panel is 17.3" QHD 2560×1440 165Hz (M57128-001)
CPU is Intel i7-11800H.
Original fault: laptop powers on, but no display.
With RAM installed: fans spin continuously, no keyboard, no display.
With RAM removed: CapsLock blinks 3 slow + 2 short (RAM error), confirming POST execution.
I have:
✔ Original 16MB BIOS dump
✔ EC (W25Q80) dump
✔ HP SoftPaq sp162936.exe
✔ Previously provided "fixed" BIOS from Vinafix, but same symptoms
This strongly indicates the BIOS is not correct for RTX3060 QHD configuration.
I kindly request a correct 16MB BIOS for OMEN 17-ck RTX3060 + QHD 165Hz model, or a working BIOS dump from a similar board so I can restore proper GPU/panel initialization. If required, I can upload all my dumps and files.
Thanks in advance!
I’m repairing an HP OMEN 17-ck0048tx with motherboard DA0G3LMBCF0 Rev F.
GPU is RTX 3060 (GN20-E7-A1)
Panel is 17.3" QHD 2560×1440 165Hz (M57128-001)
CPU is Intel i7-11800H.
Original fault: laptop powers on, but no display.
With RAM installed: fans spin continuously, no keyboard, no display.
With RAM removed: CapsLock blinks 3 slow + 2 short (RAM error), confirming POST execution.
I have:
✔ Original 16MB BIOS dump
✔ EC (W25Q80) dump
✔ HP SoftPaq sp162936.exe
✔ Previously provided "fixed" BIOS from Vinafix, but same symptoms
This strongly indicates the BIOS is not correct for RTX3060 QHD configuration.
I kindly request a correct 16MB BIOS for OMEN 17-ck RTX3060 + QHD 165Hz model, or a working BIOS dump from a similar board so I can restore proper GPU/panel initialization. If required, I can upload all my dumps and files.
Thanks in advance!