Hi Everyone,
I'm facing a problem with a locked bios with a password and i can't find how to remove it...
The small computer is only booting on a M2 ssd Windows partition and i get a "signed partition error" if i try to boot on the same SSD with another Os (linux for example).
the Computer is a Unowhy small pc
N° UYM6524702229
After failling trying to boot on other "none Windows" partition, i wanted to try to remove the bios password.
My first attempt was to get the bios dump from windows...
Try our new boardview, bios, & schematic search. Over 1.3 million files for download!
Need unlocked BIOS dump for W25Q64FV (Admin Password removal)
Collapse
X
Related Topics
Collapse
-
by Buzzfuzz2k
-
Channel: BIOS & Schematic Requests!
-
-
by TimScrawnHello,
I have a Dell XPS 9570 with a BIOS/Admin password, I can't do anything.
Here is my BIOS (32MB for BIOS).
If someone could remove my BIOS/Admin password for me so I can reflash it afterwards.
ST/SN: BGYCQV2
Thanks in advance!...-
Channel: BIOS Requests ONLY!
-
-
by Wasif AhmedI have an ROG Ally which I stupidly put a admin password on and now have forgotten.
Is there a way to remove the password for this, I dont mind resetting Windows but I have not seen a way to remove this password other than RMAing the device as a whole.02-21-2025, 03:47 PM -
by AhariHi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I...-
Channel: BIOS & Schematic Requests!
-
-
by weisianHi all,
I have a VSX-1021 that dropped the UE22 error on me and is no longer was working. I've then done the following:
1. Tried updating the firmware with a firmware I found online but it hangs at 20% and ultimately shows "Update Error 1". I didn't check prior to attempting the firmware upgrade but the firmware after shows "***" for the DSP numbers. This was before I looked online that pushing an update through with a bad DSP chip could corrupt the firmware.
2. Tried reflowing the original DSP chip (D810K013BZKB4000) but firmware version remains "***"...-
Channel: Troubleshooting Audio Equipment
03-12-2026, 05:54 AM -
- Loading...
- No more items.