ASUS Rog Strix 6050A3441302-MB-A01 BIOS

[hoaca388]

i reprogram already brother
but this laptop already refprogram by other technician
i buy it somewhere in my place

Come here :

https://www.badcaps.net/forum/troubl...78#post3804778

[techkid]

Your device is G814JZ. Fault backup, read chip again.

i reprogram already brother
but this laptop already refprogram by other technician
i buy it somewhere in my place

[hoaca388]

hello can you help me to rebuild this bios i dont know if this bios is original because already reprogram by other tech
ROG Strix SCAR 18 (2023) G814JZ
G634J-PMV-VGT
6050A3441302-MB-A01
g814jz-G18-I94080
SERIAL: R6NRKD02553123B

THANKS FOR HELP MATE APRECIATE IT

no display issue

Your device is G814JZ. Fault backup, read chip again.

[techkid]

ROG Strix SCAR 18 (2023) G834YJ

hello can you help me to rebuild this bios i dont know if this bios is original because already reprogram by other tech
ROG Strix SCAR 18 (2023) G814JZ
G634J-PMV-VGT
6050A3441302-MB-A01
g814jz-G18-I94080
SERIAL: R6NRKD02553123B

THANKS FOR HELP MATE APRECIATE IT

no display issue

[ruslan657]

hey friends, hope all u fine
need help bios

G634J-PMV-VGT
6050A3441302-MB-A01
ASUS G634JY-NM035
S/N R5NRKD00594622B

[LtCdrData]

ROG Strix SCAR 18 (2023) G834YJ

Thank you! It didn't fix my issue. Now the laptop turns on, and stays on (power light stays lit, RGB keyboard cycles through colors), but still no display. CPU/GPU do not get hot. No fans spin. Thoughts?

[hoaca388]

I have soldered wires to the chip. Are you saying that my current connection to the chip is bad? I've been using AsProgrammer and it has been detecting and working with the chip fine, as far as I can tell.
I have attached the zipped .bin file

ROG Strix SCAR 18 (2023) G834YJ

[LtCdrData]

The bios must be in ".bin" format and archived with winrar or 7zip...
The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..

you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow

I have soldered wires to the chip. Are you saying that my current connection to the chip is bad? I've been using AsProgrammer and it has been detecting and working with the chip fine, as far as I can tell.
I have attached the zipped .bin file

[peste]

Sorry, I was trying to find an edit for my main post, but I will add the relevant data here...

I was unable to get anywhere with BIOS guides, methods, resources and tools because ... one of the steps is to use ME Analyzer to get proper firmware file - ME Analyzer comes up with CSE ME 16.1.32.2418 which is not available in the repository.
Machine model number: G8347JY-XS97
Serial number: R8NRKD008963339
Board model number: G634J-PMV-VGT (6050A3441302-MB-A01)

No display. Laptop turns on for 1 minute then reboots (and repeats). No noise except fans. Attempting to flash BIOS in hopes it resolves the issue.
dump file split because of upload limits

The bios must be in ".bin" format and archived with winrar or 7zip...
The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..

you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow

[LtCdrData]

Sorry, I was trying to find an edit for my main post, but I will add the relevant data here...

I was unable to get anywhere with BIOS guides, methods, resources and tools because ... one of the steps is to use ME Analyzer to get proper firmware file - ME Analyzer comes up with CSE ME 16.1.32.2418 which is not available in the repository.
Machine model number: G8347JY-XS97
Serial number: R8NRKD008963339
Board model number: G634J-PMV-VGT (6050A3441302-MB-A01)

No display. Laptop turns on for 1 minute then reboots (and repeats). No noise except fans. Attempting to flash BIOS in hopes it resolves the issue.
dump file split because of upload limits

[hoaca388]

I'm trying to flash the bios chip but all the files on the asus website end in a 3 digit bios number. I'm not sure how to convert/trim/extract from these files to a file I can load with AsProgrammer to write to the chip.
ASUS Rog Strix Scar G18 G834JY-XS97

latest version 331 or oldest 317 would be great. thanks!
https://rog.asus.com/us/laptops/rog-...helpdesk_bios/

You MUST:

• Read BIOS guides, methods, resources and tools
• Try the method at BIOS guides, methods, resources and tools before requesting help
• Explain you were not able to succeed with the methods at BIOS guides, methods, resources and tools
• Use search function in case someone already answered your request
• Post under a related thread if it exists
• Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.
• Name your thread with make, full model numbers and request
• Provide a BIOS/EC dump if possible
• Attach files directly to your post instead of linking to external websites
• Post what the problem is, be specific - black screen, no boot, running slow, password. Do NOT post "clean me", "clear bios", "clean bios", "fix bios", "bios need" or other such terms

[LtCdrData]

I'm trying to flash the bios chip but all the files on the asus website end in a 3 digit bios number. I'm not sure how to convert/trim/extract from these files to a file I can load with AsProgrammer to write to the chip.
ASUS Rog Strix Scar G18 G834JY-XS97

latest version 331 or oldest 317 would be great. thanks!
https://rog.asus.com/us/laptops/rog-...helpdesk_bios/