Announcement

Collapse
No announcement yet.

Lenovo Thinkpad X12 Detachable 1st GEN Supervisor Password

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Lenovo Thinkpad X12 Detachable 1st GEN Supervisor Password

    Hi !

    I have a Lenovo Thinkpad X12 Detachable 1st GEN with Supervisor Password - Type 20UV-S2Q100 Serial Number: PW-01NB9P - PW01NB9P

    I attach Bios 2 Chip reading Bin, please can you try to clear it for me ?

    Attached Files

    #2
    Hello good morning !!! Anyone can help ?? Here i attach Bios file
    Attached Files

    Comment


      #3
      Originally posted by lrservicios View Post
      Hello good morning !!! Anyone can help ?? Here i attach Bios file
      Try
      Attached Files


      ----------------------------------------------------------------------------------------------------------------------------------------------------------
      All donations to Badcaps are welcome.
      Become a Badcaps supporter
      >>>>> click on this link to donate <<<<<
      Thanks to all supporters.
      ----------------------------------------------------------------------------------------------------------------------------------------------------------​

      Comment


        #4
        Originally posted by hoaca388 View Post

        Try
        Thank you for this bin however with this bin laptop doesnt turn on , voltage consumption stays in 5 volt and vero low amp check picture
        Attached Files

        Comment


          #5
          Originally posted by hoaca388 View Post

          Try
          Any other ideas )?? Thank you in advance

          Comment


            #6
            Originally posted by lrservicios View Post

            Any other ideas )?? Thank you in advance
            1. Because your SIO works with ESPI you can't use Maxpower3 method.


            Click image for larger version

Name:	image.png
Views:	58
Size:	14.0 KB
ID:	3630844
            2. Your SIO is MEC1503 so probably your single chance to read/write SIO content is thru JTAG.



            Click image for larger version

Name:	image.png
Views:	139
Size:	115.1 KB
ID:	3630841
            -------------------------------------------------------------------------------------
            Click image for larger version

Name:	image.png
Views:	58
Size:	60.5 KB
ID:	3630846

            This is my opinion, maybe some other member has better idea.
            Attached Files

            Comment


              #7
              Originally posted by Stefan Steff View Post

              1. Because your SIO works with ESPI you can't use Maxpower3 method.


              Click image for larger version

Name:	image.png
Views:	58
Size:	14.0 KB
ID:	3630844
              2. Your SIO is MEC1503 so probably your single chance to read/write SIO content is thru JTAG.



              Click image for larger version

Name:	image.png
Views:	139
Size:	115.1 KB
ID:	3630841
              -------------------------------------------------------------------------------------
              Click image for larger version

Name:	image.png
Views:	58
Size:	60.5 KB
ID:	3630846

              This is my opinion, maybe some other member has better idea.
              I have SVOD3 programmer can you show me how to conect it to motherboard ?

              Comment

              Working...
              X