Announcement

Collapse
No announcement yet.

HP Elitebook 830 G8 HP Endpoint Controller error and no power issue (intermitent)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    HP Elitebook 830 G8 HP Endpoint Controller error and no power issue (intermitent)

    Hi all,

    I have a HP Elitebook 830 G8 with endpoint controller error and besides that laptop sometimes doesn´t power on and i think it´s bios related also.
    I already tried to solve the issue with SMDFlea patch fix and now i can´t power on the equipment anymore not even replacing main bios by its original.

    Please take a look at my original main bios and help me if possible (i also attached EC BIOS without password).
    The mainboard also had password that i manage to remove.

    Thanks
    Best Regards

    Attached Files

    #2
    Originally posted by Nene01 View Post
    Hi all,

    I have a HP Elitebook 830 G8 with endpoint controller error and besides that laptop sometimes doesn´t power on and i think it´s bios related also.
    I already tried to solve the issue with SMDFlea patch fix and now i can´t power on the equipment anymore not even replacing main bios by its original.

    Please take a look at my original main bios and help me if possible (i also attached EC BIOS without password).
    The mainboard also had password that i manage to remove.

    Thanks
    Best Regards
    Find hardware issues.


    ----------------------------------------------------------------------------------------------------------------------------------------------------------
    All donations to Badcaps are welcome.
    Become a Badcaps supporter
    >>>>> click on this link to donate <<<<<
    Thanks to all supporters.
    ----------------------------------------------------------------------------------------------------------------------------------------------------------​

    Comment


      #3
      Hi hoaca388,

      Thanks for your reply, before me messing with bios extration and rewriting it i manage to get laptop working but with endpoint error, the laptop just start to not powering on at all since i mess with main bios.
      So thats why i asked if anyone could check the bins i attached or simply post some (i have no problem with dmi info, i can program it after) that i can program to see if the problem is from the bins i have or not.

      One thing i noticed that and i'm wondering if could be the issue, is when i solder the main chip i hear a "snap". Do you think its possible to read and write the main bios and the chip be faulty aswell due to too much heat perhaps?

      Thanks to anyone who can help me.

      Comment


        #4
        Hi all,

        Anyone can check my uploaded bios files to see if they are good or corrupted please?
        And if any problem is detected please correct it for me?
        ATM laptop flashes 6 times on caps lock.


        Best Regards

        Comment

        Working...
        X