I neex bios dump Thomson Neo 14.1 ua-p14c4bk128, mainboard: g142u1 rev02.
spi flash : 25q64
spi flash : 25q64
-
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs. -
My bios is corrupted. This board have Gemini lake with bootguard 5, any dump must corrected for clearing TXE 3.0 with SMIP. If you understand what i write you dont write any crazy ideas.Comment
-
Read the rules ,post what has been asked https://www.badcaps.net/forum/troubl...before-posting
Comment
-
All information i write , there is no another informstion. Bios with bootguard if you know what it mean.Comment
-
Comment
-
This is dump not working.Comment
-
Comment
-
Not working, the same problemComment
-
Bios i found, but neex to test it !Comment
-
Heloo. I need good dump for Orion CLB22RT500d . My dump is corrupt , continous restart .
Mainboard is T.SIS231.31 , with 25q64 eeprom .
Display : T215B1-P01-L05
I atached here corrupted dump .
Thanks in advance !...11-18-2024, 11:19 AM -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hello guys i really need help, i recently updated my DS-7208HGHI-K1 and it somehow got bricked, I've got it up and working now by flashing a new dump file i found but the serial number is really wrong and the uploader of the dump file probably intentionally did it.
I still have the bricked dump file is it possible to transfer the serial number of the "bricked dump" to the "working dump"? -
Hello!
i got a damaged Manson NTP-5561 (60V, 1,6A DC output) and and the main issue is that the controler IC for the LCD display has a short. The controler IC PIC18F87K90 is mounted on the back of the back of the LCD. Vss-Vdd = 3 Ohm. The 5V and 3,3V power line was killed as well, but that is not a problem. A new LDO 3,3V and 5V 7805 is already ordered.
Replacing the PIC18F87K90 is necessary but that makes no sense without having the HEX dump of the new controler.
Does anybody have such a power supply and could do a HEX dump of the Flash and EEPROM memory?
...04-12-2025, 10:38 AM -
Hello all, as the title says, I'm very much in need of a valid firmware dump of a Anycubic Photon 5.5 3D resin printer. It's stored in a Winbond 25Q32, so it's 4Mbyte.
Here's a little background for my request. A few weeks ago I bought this 3D printer from a guy who had moved on to a PLA printer. I got it at a vey reasonable price, as it was in a defective state. The seller told me that he had experienced a power failure during a firmware upgrade, after which the printer appeared to be dead. He thought the firmware was corrupted in such a way that the printer was now bricked. As he...
Comment