MSI Stealth 15M A11UEK Bios

[geethmadu]

Hello,

Can anyone help with the following:

The laptop was not posting or had no display after windows update. I re-flashed and it is now working. But, it takes one minute to boot and battery does not charge. Can anyone look at the corrupted Bios file and help /

Model : Stealth 15M A11UEK

S/N : K2102N0064812

Thank you

[peste]

Hello,

Can anyone help with the following:

The laptop was not posting or had no display after windows update. I re-flashed and it is now working. But, it takes one minute to boot and battery does not charge. Can anyone look at the corrupted Bios file and help /

Model : Stealth 15M A11UEK

S/N : K2102N0064812

Thank you

try..https://www.msi.com/Laptop/Stealth-1...lth-15M-A11UEK

[geethmadu]

I have tried that. but still the same.

[SMDFlea]

I have tried that. but still the same.

try this one.

[Gennady90]

Hi everyone, I'd be grateful if anyone could help. I have a BIOS dump, but it doesn't detect any SSDs. EMPTY is everywhere. Stealth 15M A11UEK-275RU-GG71175H16GXXDX11SH - SN:
K2112N0194527

[m1ch43lzm]

Hi everyone, I'd be grateful if anyone could help. I have a BIOS dump, but it doesn't detect any SSDs. EMPTY is everywhere. Stealth 15M A11UEK-275RU-GG71175H16GXXDX11SH - SN:
K2112N0194527

BIOS extracted from MSI website

Stealth 15M A11UEK
BIOS ver. E1563IMS.11E
Win key+DMI 1498000-149A9B0

[Gennady90]

Hello. I updated the firmware using the one you sent, but unfortunately, it didn't help. The SSD isn't recognized either, and the ME.0.0.0.0 region is missing. I've also tried different SSDs, but it still isn't recognized. My board version is MS-15631 VER: 2.0

[SMDFlea]

Hello. I updated the firmware using the one you sent, but unfortunately, it didn't help. The SSD isn't recognized either, and the ME.0.0.0.0 region is missing. I've also tried different SSDs, but it still isn't recognized. My board version is MS-15631 VER: 2.0

Try this bios.

[Gennady90]

Unfortunately, the same thing. Please help me figure this out. Could it be a board version issue? I posted the version I have above. I can't find anything on ver 2.0 anywhere.

[Gennady90]

As I understand it, there is no ME region and PCIe lines are not raised because of this.

[SMDFlea]

As I understand it, there is no ME region and PCIe lines are not raised because of this.

Try one more bios, i got this from a paid sub site.

[Gennady90]

Hello. I tried flashing the firmware, but it still didn't help. What other options are there? The problem is with the firmware, specifically the ME region.

[SMDFlea]

It looks like a hardware problem.

[m1ch43lzm]

Try a new BIOS chip
Flash chips in VSCC table:
C22019 (Macronix MX25L256), MX25L25645G/MX25L25673G
EF4019 (Winbond W25Q256), example: W25Q256JV (W25Q256FV may also work)
C84019 (GigaDevice GD25x256), GD25Q256E/GD25B256E

[Gennady90]

Hello. I replaced the flash drive with a different one and flashed it with the 15M A11UEK ME Clean.zip firmware they provided, but nothing helped. I even re-soldered the processor on a professional infrared stand. The contacts, reballing, and compatibility were perfect, but still nothing. I don't even know where else to check.