Bios dell latitude 5450

[lapfix]

Advice for the person that have RT809F

when you read a chip that isn`t supported choose a different chip with 512 capacity
use W25Q512NW that support 1.8v ...no 1.8V adapter is needed ....ignore check-ID

Thank you SMDFlea for your help

[BGinvestments]

hi, Please help me to unlock this bios.

Model: Dell Latitude 5450

ST: BRC9SW3

[hoaca388]

hi, Please help me to unlock this bios.

Model: Dell Latitude 5450

ST: BRC9SW3

Backup fault.

[Sparo]

Any solution to this fellas?
It's a 25LR512MEYIG and that's the Vcc Pin I guess
I just wanna be able to read the chip to post here along with ST and the other info

[Sparo]

I guess I'ma just try to decap the chip tomorrow and look for the internal VCC pad lol
I’ve done this before on other damaged chips that come damaged but never did a WSON8

[vidvansh]

I has the same issue with the same chip. i think they purposely build it this way so no one can work on it.
I has to buy new chip to make it work

[Sparo]

I has the same issue with the same chip. i think they purposely build it this way so no one can work on it.
I has to buy new chip to make it work

Yes they're making it kinda hard to remove by placing the ic in some tough places
I did order another IC too I'll just try to build a new bios by then since I can no longer read the old chip

[fricosu007]

could you help with a locked Dell Latitude 5450
Reg. Model : P165G
board id "
JDB41 LA-N381P
rev 1 - 2023-12-18

Ultra 5 / 16gb ddr5 / 512 ssd
MFGYR:2024
ST:JCH6Q34

read dump with REVELPROG IS x3
eeprom ic: Winbond 25R512NWEQ
dump posted as 20251002_101917_W25Q512NW.RAR

[peste]

could you help with a locked Dell Latitude 5450
Reg. Model : P165G
board id "
JDB41 LA-N381P
rev 1 - 2023-12-18

Ultra 5 / 16gb ddr5 / 512 ssd
MFGYR:2024
ST:JCH6Q34

read dump with REVELPROG IS x3
eeprom ic: Winbond 25R512NWEQ
dump posted as 20251002_101917_W25Q512NW.RAR

try...

[fricosu007]

try...

Merci frumos ! Thks A LOT ! i will test it right now ...

try...

Thanks ! its fine, working as new ! many thanks !

[appie1206]

Can someone clean this one for me need too be unlock!
servicetag :6Q2Q444

[peste]

Can someone clean this one for me need too be unlock!
servicetag :6Q2Q444

this is not the bios it is looking for a W25Q512 chip

[appie1206]

this is not the bios it is looking for a W25Q512 chip

wich one it is? the giga device... mine reader wont read it

[appie1206]

this is not the bios it is looking for a W25Q512 chip

Think is this one but it is broken i think it wont read the size ...

[SMDFlea]

Think is this one but it is broken i think it wont read the size ...

What model is your programmer and the software version

[appie1206]

What model is your programmer and the software version

i have a Svod 3 programmer ... it regconize the brand... but no size of the file shown.. is see also error unknown type flash
software version ver 1.1.2.8

[appie1206]

servicetag :6Q2Q444

this is the good one!

[SMDFlea]

servicetag :6Q2Q444

this is the good one!

It`s only read 64KB .I don`t have a SVOD programmer so i can`t advise what the settings should be.Do you have a CH341A or another programmer to make the backup with

[appie1206]

It`s only read 64KB .I don`t have a SVOD programmer so i can`t advise what the settings should be.Do you have a CH341A or another programmer to make the backup with

Yes i also have that one.... how must i set the settings too read and save the file?

[SMDFlea]

Yes i also have that one.... how must i set the settings too read and save the file?

what is the bios chip part number