Hi, I have a problem with my HP EliteDesk 705 G5 Small Form Factor computer on amd . Standard corrupted bios probably corrupted during the update. I have uploaded a clean dump from the manufacturer's website with the latest version but when I turn it on a message appears :

HP Endpoint Security Controller problem
there is a problem with the hp endpoint security controller on the unit

I tried restoring the bios security to factory defaults after the first switch-on because this helps with intel-based laptops. Here unfortunately this did not help. Does anyone have...

Hello
i need help
I have a laptop HP Probook x360 435 G7 with bios password
I succed to remove the password with the RC toll and right now i have this mesage on the scren "HP Endpoint Security Controller Problem " "Please contact the HP.Inc to have the unit serviced".
I have read the both bios chips and i have posted a picture with the chips pozition.
Can anybody help me with intruction or look on the dump if something is wrong ?
Thanks in advance!!

Edit
Serial 5CG03947C4...

please Help Me ... ProBook 430 G8
HP EndPoint Security Controller Problem...

Hello,

I have a HP Probook 650 G8 with the error "There is a problem with the HP Endpoint Security Controller on the unit."

After searching on the forum I've opened the device to check what IC's were on the motherboard and I found some corrosion on the pins of the EC ROM.
So my guess is that the EC got corrupted?

After some more searching on the forum I've found some other threads where this issue was brought up after they removed the password, this is not the case here, the laptop did not have any password and I did not modify the...

Hi! I have a HP EliteBook 845 G7. After HP logo: "there is a problem with the hp endpoint security controller on this unit" I had updated the BIOS. Didn't worked. Then replaced it with another working biosbins. But i have the same error again. Could someone help with it?Both original BIOS uploaded. MB type: LINDEN-6050A3147201-MB-A01(A1)...