Hi I'm looking for working bios and ec for HP ProBook 455 G9, motherboard DAX9SFMB8A0 REV:A
-
Hi I'm looking for working bios and ec for HP ProBook 455 G9, motherboard DAX9SFMB8A0 REV:A -
Post the laptop serial number and your backups -> https://www.badcaps.net/forum/troubl...before-posting
-
Hi I'm looking for working bios and ec for HP ProBook 455 G9, motherboard DAX9SFMB8A0 REV:A
SN : 5CD3134Y4JComment
-
Here is the Bios file, try reading the ec chip again.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp. Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Thank you sir, I will tryComment
-
hello everyone. I couldn't remove the password, can you help me?
HP ProBook 455 G9
SN: 5CD3134Y1Y
MB: DAX9SFMB8A0 REV AComment
-
Hello friends.
I have an HP Probook 455 G9 bios password, I tried the ones on the forum but the password was not removed.
I am sharing my original files. I would be very happy if you can help me. Thank you in advance.
Hp Probook 455 G9
SN: 5CD3134Y81
Product: 6H999AVComment
-
-
Hello,
I have a Lenovo Thinkbook 15 G2 ITL i5 Laptop (serial number: MP2BFZEF) that when I turn it on, the led on the power button lights up for 5 seconds, then goes out. There's no display and nothing happens.
So I thought it was a Bios problem.
I found 3 bios chips on the board, which I read with a bios programmer: two XMC model bios chips and a Winbond model bios chip. Each XMC model bios chip has two partitions named XM25QH128A [3.3V] and XT25F128A [3.3V]. And the Winbond model bios chip has three partitions named W25Q80BL 3.3V, W25Q80xV 3.3V and W25Q80DV 3.3V.... -
Hello,
I'm using TONGFANG "GM7TG7P" model laptop for over 3 years and i'm entering the same bios administrator password everyday. My laptop has Aptio BIOS (American Megatrends, AMI).
But today it's not accepting my password. I'm %100 sure i'm entering the correct password.
I'm trying to reset my bios without success.
I tried :
-I removed the BIOS battery and main battery. Waited for a long time but it didn't work. They already stated in the user manual that the password will not be reset even if the batteries... -
Hello, newbie here. please be gentle :P
I have been lurking these forums for a while trying to figure out how to get into this motherboard's bios. Hopefully to repurpose it as a general workstation. Unfortunately my bios chip reader is still in the mail, but i have managed to get windows 7 running on it and was able to make a backup of the bios.
Strangely it shows in CPU-Z as a EMBM315B02.
From what i can tell its a rebranded Zotac H87ITX-A-E missing wifi pigtails, and missing usb 3.0 internal header. I was half tempted to just order on ebay the bios... -
Dear All,
Hope that this post is at the right place of the forum.
I am seeking help and technical advice to remove bios admin password from HP ProBook 4520s.
The laptop is operating normally and, I am not facing any major issue with it except; the bios admin password that I found about by coincidence only few weeks back.
As the laptop is operating normally, I am reluctant to take it to a workshop to de-solder the bios chip in order to read it by an external programmer, as I am not an expert in doing such a thing.
After... -
Hi everyone,
I'm trying to modify my BIOS to unlock the advanced menus and unlock the processor power limits. The first thing I have tried is reading the BIOS from the laptop and opening it up in amibcp, and changing the advanced menu to User. However, no matter what tiny change I make to the BIOS, when I flash it back to the laptop with a programmer it says there is corruption and the BIOS needs to be recovered.
I've also tried rolling back the BIOS to an older version. I made the mistake of updating to the latest version and now I cannot even edit the CFG and OC...
Comment