hi any one help plz fore remove password hp probook 440 g10.
SN : 5CD4185XK3
SN : 5CD4185XK3
-
-
Hi, can i please get the password reset hp probook 440 g10
SN: 5CD333BMC2Comment
-
-
hi any one help plz fore remove password hp probook 440 g10
SN # 1H843320S4
Comment
-
Hi! Can someone help me out, please? I flashed both files from this post (https://www.badcaps.net/forum/troubl...58#post3665458), but my PC won't turn back on and the orange light is flashing.
Serial Number: 5CD4208VBP
Product #/SKU : 717Q3AV
Comment
-
Thank you, i use it with my main or with the main of this post (https://www.badcaps.net/forum/troubl...58#post3665458)?Comment
-
Hi! Can someone please help me removing the password for hp probook 440 g10
SN: 5CD3385P92
Thanks!Comment
-
SN#5CD3434GS9
REMOVING THE PASSWORDComment
-
Sublect line continuation: ... Jaguar IDS PC aka Panasonic
>Read BIOS guides, methods, resources and tools
>
Ack
>Try the method at BIOS guides, methods, resources and tools before requesting help
>
Ack
>Explain you were not able to succeed with the methods at BIOS guides, methods, resources and tools
>
python ./main.py "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.BIN" --output-dir "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.txt"
------------------------------------------------... -
Hp Probook 450 G7 s# SCD0348W35 had a locked BIOS. Bought BIOS and EC chips off Ebay that were supposed to match this machine - the 450 G7. Flashed in the BIOS on chip i bought using a CH341. BIOS unlocked next boot. Some error to contact HP. Entered BIOS and reset to system defaults and rebooted. Machine worked fine but every cold boot the contact HP message popped and everything else worked as fine. Assumed the error was from EC chip not matching BIOS that i just flashed in. So i flashed in the EC that was supposed to match from the EBay chip i bought and instant brick.
Ive got...07-08-2025, 09:24 PM -
Hello everyone!
The Asrock A380 low profile card (ID 8086 56A5 - 1849 6006) have an power limit of 45W. Intel removed the possibility to increase power using the software utility, anyway the card is in an proxmox machine that doesn't run windows.
The same hardware is in another form by the name Asrock A380 Challenger that have the same VRMs and the power limit is at 60W. I searched online and found on another website an .bin bios file from the Challenger variant, that I flashed using an CH341a. Flashng worked well, I put the card in PC and booted. GPUz shows that new device ID is 8086... -
BIOS file needed
HP PROBOOK 445 G6
DA0X9KMB8E0 REV E
S/N 5CD92213CN
No backup available -
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM
Comment