Can someone help me To remove password hp probook 440 g10 model DA0X8TMB8E1
serial : 5CD4524SD1
serial : 5CD4524SD1
-
-
Hello,
Laptop: HP ProBook 440 G10
BIOS chip: Winbond W25Q256 (32MB)
Issue: BIOS password locked
BIOS dump read with CH341A.
Original dump attached.
Could you remove the BIOS password?
Thanks.
Comment
-
I will upload the backup BIOS and SNID this weekend.
Thank you for your help.
Comment
-
hello guys, I have a pro book 440 G10
it was working normally and just stopped
keyboard lights F5 and F8 orange dots processors begins to heat up fun spins a little and process is repetitive
S:N 5CD4075G0Q
Board No_ DA0X8TMB8E1 REV : E
kindly help with new files
backups attachedComment
-
-
Hi,
I need help removing the BIOS password on my HP ProBook 440 G10 (13th Gen). I am not an IT expert, so I'm not sure if I need to "Clear ME" or modify the chips.
I have attached a ZIP with:- Winbond 25Q256JVEN (dump de 32 Mo)
- GigaDevice 25B256EYIG (dump 32MB)
Informations système :- Numéro : 5CD4132WB9
- ID de production : 9R7W8EC#ABF
Quelqu’un pourrait-il m’aider et préparer un fichier déverrouillé pour moi ?
Merci beaucoup pour votre aide !Last edited by needhelp299; 03-26-2026, 02:04 PM.Comment
-
try and feedbackComment
-
Hello everyone,
I tried the file from LBTT1121, but the BIOS password is still present.
Could someone please help me and check my original dumps again? This is a 13th Gen HP ProBook 440 G10. I have already uploaded the ZIP with both the Winbond and GigaDevice chips (32MB each) in my initial post.
System Details:- SN: 5CD4132WB9
- Prod ID: 9R7W8EC#ABF
- Build ID: 23WWKRBZ602#SABF#DABF
- Motherboard: DA0X9LMB8D0 (rev D)
Comment
-
Your bios is V72 , try the bios from this post, flash both chips - https://www.badcaps.net/forum/troubl...40#post3673040Comment
-
please helpt to remove bios pw
SCD4221F7B
A4WL4LC#ABM
HP PROBOOK 450 G10
da0x8tmb8e1 REV EComment
-
Sublect line continuation: ... Jaguar IDS PC aka Panasonic
>Read BIOS guides, methods, resources and tools
>
Ack
>Try the method at BIOS guides, methods, resources and tools before requesting help
>
Ack
>Explain you were not able to succeed with the methods at BIOS guides, methods, resources and tools
>
python ./main.py "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.BIN" --output-dir "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.txt"
------------------------------------------------... -
Hp Probook 450 G7 s# SCD0348W35 had a locked BIOS. Bought BIOS and EC chips off Ebay that were supposed to match this machine - the 450 G7. Flashed in the BIOS on chip i bought using a CH341. BIOS unlocked next boot. Some error to contact HP. Entered BIOS and reset to system defaults and rebooted. Machine worked fine but every cold boot the contact HP message popped and everything else worked as fine. Assumed the error was from EC chip not matching BIOS that i just flashed in. So i flashed in the EC that was supposed to match from the EBay chip i bought and instant brick.
Ive got... -
Hello!
I need help repairing and rebuilding the BIOS firmware after replacing the southbridge/PCH on an HP ENVY 34 All-in-One PC.
Device information:
Model: HP ENVY All-in-One 34-c0154
Product Number: 319N5AA#ABA
Motherboard: DA0NZGMBAF0 REV:F
Board code: NZG
System Board ID / SSID: 8927
HP motherboard P/N: M52651-001 / M52651-501 / M52651-601
SPI Flash: 25Q128, full 16 MB dump
Current BIOS version: F.16
The motherboard originally had a faulty Intel H570 PCH with the SRKM6 marking. The original chip was...09-02-2026, 01:54 AM -
Hello everyone!
The Asrock A380 low profile card (ID 8086 56A5 - 1849 6006) have an power limit of 45W. Intel removed the possibility to increase power using the software utility, anyway the card is in an proxmox machine that doesn't run windows.
The same hardware is in another form by the name Asrock A380 Challenger that have the same VRMs and the power limit is at 60W. I searched online and found on another website an .bin bios file from the Challenger variant, that I flashed using an CH341a. Flashng worked well, I put the card in PC and booted. GPUz shows that new device ID is 8086... -
Hi all,
I got the following Laptop from a good friend. She told me, that she couldn't boot after a bios update from huawei.
Only CapsLock, Shift and FN lit up. Fan went on for a few seconds, Power-Led blinks and it shut down. This behavior looped and after 4-5 times it would stay off.
She gave the laptop to a repair shop and the guy told her he would try to replace the Bios-Chip.
After she got it back it wouldnt boot at all. Repair guy said it is not worth it to investigate any further and that the mainboard is dead.
The Mainboard seems alright....
Comment