Announcement

Collapse
No announcement yet.

latitude 5440 la-m401p la-m402p password

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • global1
    replied
    Originally posted by volinakis View Post

    sure, and I have to guess that 16mb is empty ...
    You told me: 'as I said, upload your bios backup', so I thought you understood that my file wasn't usable, and that you just wanted me to upload one file 'bios backup'. You didn't ask for 'bios backupS', so multiple files.

    It seems that you are very annoyed with me. Maybe you can keep in mind that sometimes it takes a little bit more to get to the same point. No need to act up!

    Leave a comment:


  • volinakis
    replied
    Originally posted by global1 View Post

    Then I saw that the safed file of the 16mb whas bad, means there whas nothing in the file when I checked it in HxD. So yes, I'm something, but maybe you have bios factory mod with ME corporate, and ME consumer, and cv3 or cv3plus.
    sure, and I have to guess that 16mb is empty ...

    Leave a comment:


  • global1
    replied
    Originally posted by volinakis View Post

    both chipsets, bios is split in both. Man, you are something, you said "then I saw that the safed file of the 16mb whas bad" and you don't upload it! You want help but don't provide what is necessary to help you.
    Then I saw that the safed file of the 16mb whas bad, means there whas nothing in the file when I checked it in HxD. So yes, I'm something, but maybe you have bios factory mod with ME corporate, and ME consumer, and cv3 or cv3plus.

    Leave a comment:


  • volinakis
    replied
    Originally posted by global1 View Post


    ST: C940GY3
    both chipsets, bios is split in both. Man, you are something, you said "then I saw that the safed file of the 16mb whas bad" and you don't upload it! You want help but don't provide what is necessary to help you.
    Click image for larger version

Name:	Screen Shot 2024-10-03 at 21.21.40.png
Views:	209
Size:	53.2 KB
ID:	3475605
    Last edited by volinakis; 10-03-2024, 12:22 PM.

    Leave a comment:


  • global1
    replied
    Originally posted by volinakis View Post

    as I said, upload your bios backup ...

    ST: C940GY3
    Attached Files

    Leave a comment:


  • volinakis
    replied
    Originally posted by global1 View Post

    I mean bios factory mode file. I saw that gayyum786 shared these files on the page called ' Dell latitude 5440 la-m402p rev 1.0(A00)'
    You can see what he shered under message #7
    gayyum786 says 'Here is your new bios factory mode (No dmi or service tag add it manually)'.


    I tried to remove password, so I paid for file on Vinafix. After flashing there was still a bios password. So not so very smart I flashed the 16mb fil, and that didn't work. So I flashed back the original files, but then I saw that the safed file of the 16mb whas bad. So therefore I try to get clean, not used files, and I thought by reading the post from gayyum786 for the LA-M402P, that there must be also factory mode files for the LA-M401P. Asking for support on Vinafix whas a bad experience, so I turned to you badcap users.
    as I said, upload your bios backup ...

    Leave a comment:


  • global1
    replied
    Originally posted by volinakis View Post

    what means "clean files"? Nobody can help you without your bios backup, there are 2 types of Lat 5440, Cv3 and Cv3plus, also same model can use ME Corporate firmware or Consumer Fw
    I mean bios factory mode file. I saw that gayyum786 shared these files on the page called ' Dell latitude 5440 la-m402p rev 1.0(A00)'
    You can see what he shered under message #7
    gayyum786 says 'Here is your new bios factory mode (No dmi or service tag add it manually)'.


    I tried to remove password, so I paid for file on Vinafix. After flashing there was still a bios password. So not so very smart I flashed the 16mb fil, and that didn't work. So I flashed back the original files, but then I saw that the safed file of the 16mb whas bad. So therefore I try to get clean, not used files, and I thought by reading the post from gayyum786 for the LA-M402P, that there must be also factory mode files for the LA-M401P. Asking for support on Vinafix whas a bad experience, so I turned to you badcap users.

    Leave a comment:


  • volinakis
    replied
    Originally posted by global1 View Post

    Maybe I didn't understand what you wanted. I thought you asked for service tag to help me with files. But am I wrong? Do you just inform me about the need to give service tag to get help? This was my second post, and if it's the case you pointed me to the rules, than sorry for making a mistake. I thought it wasn't needed, because I need clean files.
    what means "clean files"? Nobody can help you without your bios backup, there are 2 types of Lat 5440, Cv3 and Cv3plus, also same model can use ME Corporate firmware or Consumer Fw

    Leave a comment:


  • global1
    replied
    Originally posted by SMDFlea View Post
    Maybe I didn't understand what you wanted. I thought you asked for service tag to help me with files. But am I wrong? Do you just inform me about the need to give service tag to get help? This was my second post, and if it's the case you pointed me to the rules, than sorry for making a mistake. I thought it wasn't needed, because I need clean files.

    Leave a comment:


  • global1
    replied
    Originally posted by SMDFlea View Post
    ST: C940GY3

    Leave a comment:


  • SMDFlea
    replied
    Originally posted by global1 View Post
    Hello, can enyone help me with two clean files for the LA-M401P?
    I need a new 16mb bios factory mode file with no dmi or service tag, and a 32mb main bios file.
    Service tag ? https://www.badcaps.net/forum/troubl...before-posting

    Leave a comment:


  • global1
    replied
    Hello, can enyone help me with two clean files for the LA-M401P?
    I need a new 16mb bios factory mode file with no dmi or service tag, and a 32mb main bios file.

    Leave a comment:


  • andrew25
    replied
    Originally posted by rex98 View Post

    1st boot, press F2, write service tag, disable Absolute, save (Apply changes), restart. 2nd boot press Alt+F to exit manufacturing mode
    thanks bro for quick reply, it worked on 1st shot

    Leave a comment:


  • ayceur
    replied
    clear and write for ic 1 and 2
    the problem is solved
    I'm happy

    Leave a comment:


  • rex98
    replied
    Originally posted by andrew25 View Post
    Can anybody help me unlock my bios dump, it has admin pw.. LA-M401P
    S/T: 4R8BDY3
    8FC8 code
    1st boot, press F2, write service tag, disable Absolute, save (Apply changes), restart. 2nd boot press Alt+F to exit manufacturing mode
    Attached Files

    Leave a comment:


  • andrew25
    replied
    Can anybody help me unlock my bios dump, it has admin pw.. LA-M401P
    S/T: 4R8BDY3
    8FC8 code
    Attached Files

    Leave a comment:


  • ayceur
    replied
    I can't access bios
    I can't access windows

    Leave a comment:


  • ayceur
    replied
    I don't know how to write in English, I translate, sorry

    Leave a comment:


  • ayceur
    replied
    I have this problem ME region corrupted?

    I didn't do a factory reset
    Attached Files

    Leave a comment:


  • ayceur
    replied
    Thank you so much!

    Leave a comment:

Working...
X