Fujitsu-Siemens bios unlock tool for the new 203c-d001-xxxx-xxxx-xxxx-xxxx scheme

[Phuoc Tan]

Re: Fujitsu-Siemens bios unlock tool for the new 203c-d001-xxxx-xxxx-xxxx-xxxx scheme

Thank so much !!!

[Mr.Nobody]

Re: Fujitsu-Siemens bios unlock tool for the new 203c-d001-xxxx-xxxx-xxxx-xxxx scheme

Do you have anything for an old Toshiba? :_))

THX for new gen :_))))

For old versions try here : https://beta.bios-pw.org/

[Sabine]

Re: Fujitsu-Siemens bios unlock tool for the new 203c-d001-xxxx-xxxx-xxxx-xxxx scheme

GREATING!! Thank you so mutch !!

[przemek_79]

Re: Fujitsu-Siemens bios unlock tool for the new 203c-d001-xxxx-xxxx-xxxx-xxxx scheme

Do you have anything for an old Toshiba? :_))

THX for new gen :_))))

[Mr.Nobody]

Re: Fujitsu-Siemens bios unlock tool for the new 203c-d001-xxxx-xxxx-xxxx-xxxx scheme

good job

Thanks for feedback.
Appreciated.
Cheers!

[rediii]

Re: Fujitsu-Siemens bios unlock tool for the new 203c-d001-xxxx-xxxx-xxxx-xxxx scheme

This project was inspired by PolloLocos GitLab project from here : https://gitlab.com/polloloco/fujitsu-bios-unlocker.

I write an "User friendly" program what works offline.
Unpack the two files in the same directory then run FSUnlock_NEW_GUI.exe.
The first two groups (203c-d001-) are auto-completed and after that you must type just the characters because dashes are auto-completed as well.
Hit Enter or click on "Generate the master password".

Don't forget to clear the Supervisor password after entering the BIOS with the same master password as Supervisor password and hit Enter twice to clear it.
F10 and exit.
Done!

good job

[Mr.Nobody]

This project was inspired by PolloLocos GitLab project from here : https://gitlab.com/polloloco/fujitsu-bios-unlocker.

I write an "User friendly" program what works offline.
Unpack the two files in the same directory then run FSUnlock_NEW_GUI.exe.
The first two groups (203c-d001-) are auto-completed and after that you must type just the characters because dashes are auto-completed as well.
Hit Enter or click on "Generate the master password".

Don't forget to clear the Supervisor password after entering the BIOS with the same master password as Supervisor password and hit Enter twice to clear it.
F10 and exit.
Done!