Hp elitebook 840 g9

[babarali]

hi try

Password is still

[shiyab]

Password is still

hi try flash both

[infodoc02]

hey
HP 840 G9
SN/5CG3304023
plz remove password

flash only main
when booting press f10 and reset security settings

[babarali]

flash only main
when booting press f10 and reset security settings

Password is still

[babarali]

flash only main
when booting press f10 and reset security settings

thanks 100% working

[infodoc02]

GREAT, enjoy

[pokyss1]

HP 840 g9
front Dump
SN:5cg3082t7k

[shiyab]

HP 840 g9
front Dump
SN:5cg3082t7k

issue?

[pokyss1]

issue?

unlock bios

[Sparo]

unlock bios

Unlocked

[pokyss1]

Unlocked

Thax is working good.

[jones]

hp 840 g9 bios password?
chip U367 by the ram

[Sparo]

hp 840 g9 bios password?
chip U367 by the ram

Hi, You have to post the Serial Number with every single request (As per the Forum rules)
> RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING* - Badcaps

[shiyab]

hp 840 g9 bios password?
chip U367 by the ram

post snid

[jones]

hp 840 g9 bios password?
chip U367 by the ram
SN: 5cg3123jqg

[shiyab]

hp 840 g9 bios password?
chip U367 by the ram
SN: 5cg3123jqg

hi try flash both

[jones]

hello. the bios password removed but there is no serial number in the bios system information is blank?

[infodoc02]

enter to the security settings and reset defaults
then reflash your main old

[jones]

thank you shiyad and infadoco2
i flashed the main bios with old dump and the serial number shows but the computer restart many times after the logo screen before it log to the bios not for the first try, and that kept happen after the battery installed and cmos battery too, even next day still the computer restart on logo screen couple time after the power button bushed before it boot to the bios, by the way the first flash from shiyad works fine with no issue just i dont have the laptop info in that bios.
the bios from shiyad is generic not a clean dump from my main bios is that why i dont have the serial number on the first?
2nd question: i cleared a bios password on hp 840 g8 before using RCunlocker software and it works and i tried to change the bios dump on hex editor using the search for some specific address and change them from 3C to 3F on the main bios and it works. i tried to use rcunlocker on 840 G9 but didnt work, and i tried the hex editor way i changed all the codes on specific addresses as the G8 on main dump but the that didnt clear the bios password?
so is there a text list of the address on main and EC bios chips to change the codes? or there is a update for rcunlocker that will take care of main and ec dump or other script / software will work?
or where i can learn to clear the G9 main and EC ship by my self

[Sparo]

2nd question: i cleared a bios password on hp 840 g8 before using RCunlocker software and it works and i tried to change the bios dump on hex editor using the search for some specific address and change them from 3C to 3F on the main bios and it works. i tried to use rcunlocker on 840 G9 but didnt work, and i tried the hex editor way i changed all the codes on specific addresses as the G8 on main dump but the that didnt clear the bios password?
so is there a text list of the address on main and EC bios chips to change the codes? or there is a update for rcunlocker that will take care of main and ec dump or other script / software will work?
or where i can learn to clear the G9 main and EC ship by my self

Hi, Read this about RCUnlocker for 32MB chips > https://www.badcaps.net/forum/troubl...27#post3849527

[mt3d]

hi hp 840 g9 bios password? SN: 5CG3183CXQ

[danito]

hi hp 840 g9 bios password? SN: 5CG3183CXQ

Your bios is U71 https://www.badcaps.net/forum/troubl...90#post3672790

[mt3d]

hi please remove s password