Re: HP ProBook 430 G8 hp endpoint security controller problem
The original file but before clear me not display
-
Hi, I have a problem with my HP EliteDesk 705 G5 Small Form Factor computer on amd . Standard corrupted bios probably corrupted during the update. I have uploaded a clean dump from the manufacturer's website with the latest version but when I turn it on a message appears :
HP Endpoint Security Controller problem
there is a problem with the hp endpoint security controller on the unit
I tried restoring the bios security to factory defaults after the first switch-on because this helps with intel-based laptops. Here unfortunately this did not help. Does anyone have... -
Hi! I have a HP EliteBook 845 G7. After HP logo: "there is a problem with the hp endpoint security controller on this unit" I had updated the BIOS. Didn't worked. Then replaced it with another working biosbins. But i have the same error again. Could someone help with it?Both original BIOS uploaded. MB type: LINDEN-6050A3147201-MB-A01(A1)... -
Hello,
I have a HP Probook 650 G8 with the error "There is a problem with the HP Endpoint Security Controller on the unit."
After searching on the forum I've opened the device to check what IC's were on the motherboard and I found some corrosion on the pins of the EC ROM.
So my guess is that the EC got corrupted?
After some more searching on the forum I've found some other threads where this issue was brought up after they removed the password, this is not the case here, the laptop did not have any password and I did not modify the...03-30-2023, 04:26 AM -
Hi! Please help with Endpoint Security Controller Problem, sending old not working dumps. Thankyou
and there is no soud after flashing new bios, may be have some solutions?
ProdID: 4YD62AV
SN: 2TK9500V8X... -
After removing the password I get an error "There is a problem with hp endpoint security controller on the unit". I read that I need a modified BIOS. There are 3 ISP on my board.
Mainbard model:6050A3044201-MB-A01 (A1)
Serial Number: 5CG0275ZLV
(I'm not allowed to upload files with the extension bin, so I upload zip)...
Leave a comment: