Need help to remove password from bios. Thanks.
HP Probook 450 G9
Serial: 5CD2236GBP
try this. write only main bios 32Mb. It will enter in MPM mode, 1st time when enter in bios reset to factory defaults, save, restart, then enter again in bios and in Main tab you have "set machine unique data" and write this:
Feature Byte
476J6S6b7B7J7M7Q7W7saBapaqauawbUbhcAdpdqfPguk8mEmGmwn7nVpFpTpqqjqz.yG (no spaces)
Build Id
22WWRTBT601#SUUF#DUUF
Serial
5CD2236GBP
SKU
6J8W4PA#UUF
System Board CT
PQNNH018JGQ31Z
Name
HP ProBook 450 15.6 inch G9 Notebook PC or you can cut it to HP ProBook 450 G9
after that save and use BCU 4.0 to exit MPM mode or restart laptop how many times counter shows.
try this. write only main bios 32Mb. It will enter in MPM mode, 1st time when enter in bios reset to factory defaults, save, restart, then enter again in bios and in Main tab you have "set machine unique data" and write this:
Feature Byte
476J6S6b7B7J7M7Q7W7saBapaqauawbUbhcAdpdqfPguk8mEmGmwn7nVpFpTpqqjqz.yG (no spaces)
Build Id
22WWRTBT601#SUUF#DUUF
Serial
5CD2236GBP
SKU
6J8W4PA#UUF
System Board CT
PQNNH018JGQ31Z
Name
HP ProBook 450 15.6 inch G9 Notebook PC or you can cut it to HP ProBook 450 G9
after that save and use BCU 4.0 to exit MPM mode or restart laptop how many times counter shows.
tried to flash main bios, resoldering and after attaching battery, keyboard lights 5x then when i press power, caps lock and numlock blink 7x simultaneously then powers off. pressing power again makes caps lock and numlock blink 7x.
btw, it doesn't dislplay anything during the process.
Last edited by nueziel; 07-10-2023, 10:07 PM.
Reason: additional info
tried to flash main bios, resoldering and after attaching battery, keyboard lights 5x then when i press power, caps lock and numlock blink 7x simultaneously then powers off. pressing power again makes caps lock and numlock blink 7x.
btw, it doesn't dislplay anything during the process.
remove battery, also cmos battery, plug adapter and wait for 2 minutes, it will restart several times without displaying anything, don't press any button.
remove battery, also cmos battery, plug adapter and wait for 2 minutes, it will restart several times without displaying anything, don't press any button.
sorry for the lack of update, i have successfully unlocked my laptop. thank you!
Hi guys! I`m also have same problem with bios password. Please help me. What shoul I do? Take bios flash from motherboard then... Please, can you make litlle instruction for me?
try this. write only main bios 32Mb. It will enter in MPM mode, 1st time when enter in bios reset to factory defaults, save, restart, then enter again in bios and in Main tab you have "set machine unique data" and write this:
Feature Byte
476J6S6b7B7J7M7Q7W7saBapaqauawbUbhcAdpdqfPguk8mEmGmwn7nVpFpTpqqjqz.yG (no spaces)
Build Id
22WWRTBT601#SUUF#DUUF
Serial
5CD2236GBP
SKU
6J8W4PA#UUF
System Board CT
PQNNH018JGQ31Z
Name
HP ProBook 450 15.6 inch G9 Notebook PC or you can cut it to HP ProBook 450 G9
after that save and use BCU 4.0 to exit MPM mode or restart laptop how many times counter shows.
If I understand right, I can also use this .zip but setup my Serial. Or it harder than I think? Is it possible whitout removing bios flash?
Sorry for stupid questions, I`m new at this)
Last edited by vlad4volk; 08-03-2023, 10:45 AM.
Reason: add questions
If I understand right, I can also use this .zip but setup my Serial. Or it harder than I think? Is it possible whitout removing bios flash?
Sorry for stupid questions, I`m new at this)
no, it's not possible if you have bios password. If you want to change serial, ID, name, etc. and you DON'T HAVE PASSWORD on bios you can use BCU 4.0 or higher.
no, it's not possible if you have bios password. If you want to change serial, ID, name, etc. and you DON'T HAVE PASSWORD on bios you can use BCU 4.0 or higher.
No, I want remove password from bios, and save serial, windows key(if it on bios) etc. I just need to install windows (coz now it's working as "to go").
No, I want remove password from bios, and save serial, windows key(if it on bios) etc. I just need to install windows (coz now it's working as "to go").
you can't use another bios from another laptop, your own bios has to be modified. "set UNIQUE machine data" does sound a bell?
I`ve compared bios from top of thread and the one you send, it have just 7 differences. Can I change my bios in same place or it doesent work like that? Also I`ve see solution to find and remove "nvramactiveRegn". Which way is better?
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
try this. write only main bios 32Mb. It will enter in MPM mode, 1st time when enter in bios reset to factory defaults, save, restart, then enter again in bios and in Main tab you have "set machine unique data" and write this:
Feature Byte
476J6S6b7B7J7M7Q7W7saBapaqauawbUbhcAdpdqfPguk8mEmGmwn7nVpFpTpqqjqz.yG (no spaces)
Build Id
22WWRTBT601#SUUF#DUUF
Serial
5CD2236GBP
SKU
6J8W4PA#UUF
System Board CT
PQNNH018JGQ31Z
Name
HP ProBook 450 15.6 inch G9 Notebook PC or you can cut it to HP ProBook 450 G9
after that save and use BCU 4.0 to exit MPM mode or restart laptop how many times counter shows.
hey..why I can not change admin pass in this bios ..... when I enter old pass it sais wrong pass...
The bios posted by Volinakis in your quoted post was a reply to a request from another member.
If you have similar model with similar problem post your request adding first all the necessary information as per the rules RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING* https://www.badcaps.net/forum/troubl...before-posting
Comment