DAG3PMB18B0 bios
Collapse
X
-
Comment
-
-
tested and working bios.
when there is no image you must check hardwareAttached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
Comment
-
Comment
-
you write it with errors... remove the bios chip from the board before writing or reading... solder it to the programmer or put it in the adapter and then in the programmer... don't use the clip, it gives errors... if you don't have anything to solder it with, solder wires between the chip and the programmer..Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
I desoldered the chip, placed it in the EZP 2023 programmer, flashed it, and then soldered it in place!
you write it with errors... remove the bios chip from the board before writing or reading... solder it to the programmer or put it in the adapter and then in the programmer... don't use the clip, it gives errors... if you don't have anything to solder it with, solder wires between the chip and the programmer..Comment
-
SIR
NEED BIOS FOR HP VICTUS
OLD BIOS ATTAHED
MODEL: 15-FA0353TX
SN: 5CD320B138Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
bios extracted from HP website update for Victus Gaming Laptop 15-fa0353TX (6N030PA)
DMI 801000 -80300F
KEYWIN 8A6000 - 8A603FAttached Filesif you find these attachements useful please consider making a small donation to the site
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
Related Topics
Collapse
-
by macabookHello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
-
Channel: BIOS Requests ONLY!
07-24-2025, 02:17 PM -
by cr4zychrissHello everyone,
I am requesting urgent assistance to unbrick my laptop, a rebranded TongFang GK7MRFR chassis. The laptop is completely dead following a faulty in-OS EC flash attempt.
I have successfully used a CH341A programmer and can read/write/verify both flash chips, but using my backups/extractions has failed to restore power. The root cause is likely a corrupted Intel Management Engine (ME) region or an incompatible EC/BIOS pairing. System & Hardware Details- Barebone / Chassis: TongFang GK7MRFR
- MB: MB: GK5MP5X V1.0 Prod :GK5MRFV10T04201310281
- Rebrand: PC Specialist
-
Channel: BIOS Requests ONLY!
-
by piratiHello everyone,
I recently bought a non-working Asus Zenbook Pro Duo OLED UX8402ZA that was listed for parts only. The seller mentioned that it had no display output but that the charging lights worked.
When the laptop arrived (without a charger and SSD), I connected a charger and confirmed with a multimeter that it was charging the battery. However, when I tried to power it on, only the backlight of the secondary display came on. There was no image, and it didn’t boot into the BIOS.
I decided to try flashing a new BIOS, but since I didn’t want to desolder...-
Channel: BIOS Requests ONLY!
-
-
by Vesko356First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If...-
Channel: BIOS Requests ONLY!
-
-
Product Name: Razer Blade 15 (2022)
Product ID: RZ09-0421
Motherboard: CH580
BIOS Versions I work with: 2.02 & 2.06
Bios File Size: 32,768 KB
Dear Forum Readers!
I'm looking for a BIOS modder or anyone with experience who would give me suggestions about my razer blade's BIOS settings.
I can view and edit the content of the BIOS .bin file with AMIBCP BIOS editor.
The BIOS files I'm working with are from badcaps.net and those are CLEAN BIOS files (anyone can find it with the search string: RZ09-0421).
!!! MY RAZER BLADE...-
Channel: BIOS Requests ONLY!
11-24-2025, 05:52 PM -
- Loading...
- No more items.
Comment