Originally posted by djdhusy
View Post
Announcement
Collapse
No announcement yet.
Dell Lattitude FDZ41 LA-J372P REV 1.0 32 MB
Collapse
X
-
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
-
Originally posted by djdhusy View PostHi everyone, good day to all,
here I attached corrupted bios file plz help me to get a clr file
Model - precision 55302 in 1
Service tag-JJTYSQ2
Board-DAZ10 LA-F221P
Service Tag: JJTYSQ2
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
Comment
-
Hello,
Received a Dell Laptop with some problems on startup (long delays, no-POST, reset) and manufacturer mode is active all the time.
Even after writing ST and ALT+F on startup.
Bios chip looks re-soldered and some plastic surrounding it show signs of hot air blow. .
So I think it was reprogrammed with another computer dump.
Me Region read from chip: 14.1.67.2046
Tested with some dumps from bios request / pwd unlock thread.
and got one working very well (fast boot , exit from Man mode ok) but not detect ssd nvme.
Me Region of this partially working bios: 14.0.39.1339
Attached both dumps.
Dell Latitude 5410 (RegModel: P98G)
MB: LA-J372P Rev 1.0
Bios Chip: XMC QH256BXIQ (32MB)
ST:1GJ08C3
Attached Files
Comment
-
Originally posted by lpraderi View PostHello,
Received a Dell Laptop with some problems on startup (long delays, no-POST, reset) and manufacturer mode is active all the time.
Even after writing ST and ALT+F on startup.
Bios chip looks re-soldered and some plastic surrounding it show signs of hot air blow. .
So I think it was reprogrammed with another computer dump.
Me Region read from chip: 14.1.67.2046
Tested with some dumps from bios request / pwd unlock thread.
and got one working very well (fast boot , exit from Man mode ok) but not detect ssd nvme.
Me Region of this partially working bios: 14.0.39.1339
Attached both dumps.
Dell Latitude 5410 (RegModel: P98G)
MB: LA-J372P Rev 1.0
Bios Chip: XMC QH256BXIQ (32MB)
ST:1GJ08C3
Service Tag: 1GJ08C3Attached Files
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
Comment
Comment