Hello,
I have a HP Probook 650 G8 with the error "There is a problem with the HP Endpoint Security Controller on the unit."
After searching on the forum I've opened the device to check what IC's were on the motherboard and I found some corrosion on the pins of the EC ROM.
So my guess is that the EC got corrupted?
After some more searching on the forum I've found some other threads where this issue was brought up after they removed the password, this is not the case here, the laptop did not have any password and I did not modify the original BIOS/EC ROMS.
When comparing "original" roms and "fixed" roms that other people provided on the forum, I've noticed that the complete VSS2 Store was set to "FF" in the "fixed" ROM.
But this erases all DMI data no? Including the OA3 key?
I hope somebody can help or even educate me on how to deal with this issue.
Original ROM files are attached.
Thank you.
I have a HP Probook 650 G8 with the error "There is a problem with the HP Endpoint Security Controller on the unit."
After searching on the forum I've opened the device to check what IC's were on the motherboard and I found some corrosion on the pins of the EC ROM.
So my guess is that the EC got corrupted?
After some more searching on the forum I've found some other threads where this issue was brought up after they removed the password, this is not the case here, the laptop did not have any password and I did not modify the original BIOS/EC ROMS.
When comparing "original" roms and "fixed" roms that other people provided on the forum, I've noticed that the complete VSS2 Store was set to "FF" in the "fixed" ROM.
But this erases all DMI data no? Including the OA3 key?
I hope somebody can help or even educate me on how to deal with this issue.
Original ROM files are attached.
Thank you.