need bios HP Mini 2133

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • resistor83
    Senior Member
    • Oct 2018
    • 127
    • Italy

    #1

    need bios HP Mini 2133

    hello all, I need a dump of an HP Mini 2133

    motherboard: 6050A2227701 POWERB A04

    I have this problem (see photo) and I want to try to flash the bios



    Here my dump:
    Attached Files
    Last edited by resistor83; 02-13-2023, 03:11 PM.
  • resistor83
    Senior Member
    • Oct 2018
    • 127
    • Italy

    #2
    Re: need bios HP Mini 2133

    UPDATE: I updated the bios but the problem remains

    Comment

    • resistor83
      Senior Member
      • Oct 2018
      • 127
      • Italy

      #3
      Re: need bios HP Mini 2133

      UPDATE 2: reflow cpu and the problem is gone

      Comment

      Related Topics

      Collapse

      • Habble7
        I need a BIOS dump for the Samsung S49CG934SU monitor
        by Habble7
        The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.

        Suspected Cause:
        I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.

        Troubleshooting Attempts:
        ...
        05-22-2025, 07:28 AM
      • Citymin
        NT955XED (Samsung Galaxy Book2 Pro - 15.6) BIOS dump file Request
        by Citymin
        Hi all,

        My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
        The charging red LED lights up, but the charging screen doesn't show any indication.
        When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
        (I've tried removing the battery and resetting the device, but the issue persists.)

        NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
        PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
        S/N : 5RNK9FFT70...
        08-05-2025, 05:12 AM
      • DynaxSC
        MSI PRO B660M-G DDR4 - real bios dump from board needed (no stock bios)
        by DynaxSC
        Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).

        I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...
        11-17-2023, 10:56 AM
      • ruzhda
        Clean Bios dump for HP 260 G4 mini
        by ruzhda
        Hi,

        I am new in forum, working whit computers since Commodore 64 (own 2 defect units) And Amiga 1200,

        I taring to fix HP 260 G4 mini whit bios corrupted error , after reading and writing bios whit programmer pc is not powering on .

        I need clean dump to write new IC chip.

        Thanks
        07-21-2024, 08:10 AM
      • MDSI
        HP OMEN 17-an012nf BIOS dump with EC (DAG3BAMBAF0 REV : F)
        by MDSI
        Hello,

        I'm requesting a full BIOS dump (including EC firmware) for an HP OMEN 17-an012nf laptop.

        Details:
        Model : HP OMEN 17-an012nf
        Motherboard Part Number : DAG3BAMBAF0 REV : F
        Serial Number (S/N) : 5CD7280D51
        BIOS chip : Winbond W25Q64VSIQ
        Programmer : EZP2023+
        Issue : The motherboard is not powering on. Only the 5V rail is present. The 3.3V rail is missing because EN1 on the SY8286B remains stuck at 0V. This signal is driven directly by the EC/SIO. I replaced the 3.3V regulator and confirmed it's working.

        I already...
        07-28-2025, 07:11 AM
      • Loading...
      • No more items.
      Working...