lenovo K14 gen 1 password

[alfredposadas09]

Re: lenovo K14 gen 1 password

i solve this problem

[Tek-jay-el]

Re: lenovo K14 gen 1 password

can you give a bios bin for his model

[SMDFlea]

Re: lenovo K14 gen 1 password

can you give a bios bin for his model

RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/showthread.php?t=103570

.

[greenlaptop]

Re: lenovo K14 gen 1 password

I have the EC file for lenovo k14 gen 1 nm-E111 ITE 8227 256kb

CAN YOU SHARE IT WITH ME?

[toshyou]

good day, can someone remove supervisor password .. ,

serial: pf41m3dp
model: k14 gen1

il did try other clean bin but self healing bios thats why stillback to supervisor password. ...

[jhomhar08@gmail.com]

Re: lenovo K14 gen 1 password

I have the EC file for lenovo k14 gen 1 nm-E111 ITE 8227 256kb

sir i need it also

[Dan20701]

Hello all, Can anyone give a guide to reading this ITE chip please, I am using SVOD4 with the keyboard adaptor
I have done everything the best I know how, I am getting the ITE busy message.

Lenovo K14 Gen1
SN : PF42ZBKK
Motherboard : JK4A0 NM-E111 REV 1.0

Thanks so much.

[Dan20701]

I got there in the end, I have read the ITE chip with svod with 256 KB config, I erased the chip powered off for a wile like with the t490
then programmed the chip again. the password is still there.

I need help to edit the ITE dump removing the password please or have I missed something.

Is there anyone that can help, Thanks.

[hoaca388]

I got there in the end, I have read the ITE chip with svod with 256 KB config, I erased the chip powered off for a wile like with the t490
then programmed the chip again. the password is still there.

I need help to edit the ITE dump removing the password please or have I missed something.

Is there anyone that can help, Thanks.

Try

[Dan20701]

hoaca you have done it again mate, Thanks so much for your help its working password is gone.

[_F.fernan]

I got there in the end, I have read the ITE chip with svod with 256 KB config, I erased the chip powered off for a wile like with the t490
then programmed the chip again. the password is still there.

I need help to edit the ITE dump removing the password please or have I missed something.

Is there anyone that can help, Thanks.

Good day sir . what settings did you use on svod to connect the board ? i have svod3 and i cant connect mine .

[_F.fernan]

Try

Good Day sir here is my backup . it has a bios password also .

[Maxpower3]

Good Day sir here is my backup . it has a bios password also .

READ 256K NOT 128

[_F.fernan]

READ 256K NOT 128

My svod3 reads it as 128kb

[_F.fernan]

READ 256K NOT 128

Here it is 256KB .

[Maxpower3]

Here it is 256KB .

Serial PF41QN5N

Try 00 or FF if not work

https://www.badcaps.net/forum/troubl...before-posting

Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,
The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.

[_F.fernan]

Serial PF41QN5N

Try 00 or FF if not work

https://www.badcaps.net/forum/troubl...before-posting

Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,
The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.

Thank you very much sir! First attemp used 00 works

[izaak94]

Hello, could someone help me unlock this device, it has the administrator password activated, absolute, autopilot and a custom logo, I already tried with an ITE file from another post but the SSD does not recognize me

Lenovo K14 Gen1

SN: PF43QTKR

Placa base: JK4A0 NM-E111 REV 1.0

[Maxpower3]

Hello, could someone help me unlock this device, it has the administrator password activated, absolute, autopilot and a custom logo, I already tried with an ITE file from another post but the SSD does not recognize me

SN: PF43QTKR

try
just absolute and password removed

[izaak94]

try
just absolute and password removed

Hello, both files are already written, the computer is now without an administrator password, without an absolute one, but it still has the custom logo (not the Lenovo one) and on autopilot (it necessarily asks me for a Microsoft account) try various bypass methods but without result