hi all, I replaced the kb9028q, it was giving power problems,
replaced with a new one I now find the 3.3 and 5v, 3v power button, but nothing starts, led connector off,
i think the kbc must be programmed because empty, i have tl866cs, i wanted to know if there is a way I can write with the programmer, solder the wires and have it read to the tl866cs programmer,
thank you
replaced with a new one I now find the 3.3 and 5v, 3v power button, but nothing starts, led connector off,
i think the kbc must be programmed because empty, i have tl866cs, i wanted to know if there is a way I can write with the programmer, solder the wires and have it read to the tl866cs programmer,
thank you