GL502VM Rev. 2.1 Keyboard Problem [SOLVED]

[SMDFlea]

Re: GL502VM Rev. 2.1 Keyboard Problem

[QUOTE=lazaro.089;916709]Sorry for the late response, I took off the weekend.

Here is my main Bios dump

Your bios backup isn`t proper. Make another backup and post it in the other thread of yours in the bios requests.

[SMDFlea]

Re: GL502VM Rev. 2.1 Keyboard Problem

Its the ITE8171 that gets programmed by a vertyanov programmer

GL502VM IT8171 KB_pins=30 LEFT DOWN FLASH=56 PD0=29 PD1=20 PD2=15 PD3=23 PD4=14 PD5=16 PD6=12 PD7=30 BUSY=26 STB=18 AFD=28 INIT=21 SLIN=19 KSI4=22 KSI5=24

[lazaro.089]

Re: GL502VM Rev. 2.1 Keyboard Problem

I flashed the Main bios with
https://www.badcaps.net/forum/showth...658#post843658

But still no working keyboard.
I think the firmware is stored in IT8995VG-128 but I don't know how to program.

[lazaro.089]

Re: GL502VM Rev. 2.1 Keyboard Problem

Sorry for the late response, I took off the weekend.

Here is my main Bios dump

The problem (for me) is understand how this system works.
This notebook (gl502 series) has two ITE chips, the first is the IT8171FN-56 / BX for the keyboard and can be programmed via the keyboard port, the other IT8995VG-128 / CX has a dedicated port for its programming. I wanted to understand where its firmware is stored and if it has an internal memory, etc

I'm also wondering this. I have a board view but doesn't have an schematic.

[jasko_jacker]

Re: GL502VM Rev. 2.1 Keyboard Problem

Do you mean my card compared to the GL502VM model? , this and the gl502VSK have the same chips but positioned differently, and some components have the same identifier. I think the working principle is the same.

[SMDFlea]

Re: GL502VM Rev. 2.1 Keyboard Problem

Edit:looking at wrong boardview

[jasko_jacker]

Re: GL502VM Rev. 2.1 Keyboard Problem

The problem (for me) is understand how this system works.
This notebook (gl502 series) has two ITE chips, the first is the IT8171FN-56 / BX for the keyboard and can be programmed via the keyboard port, the other IT8995VG-128 / CX has a dedicated port for its programming. I wanted to understand where its firmware is stored and if it has an internal memory, etc

[mcplslg123]

Re: GL502VM Rev. 2.1 Keyboard Problem

I used one downloaded from Vinafix.
I haven't found any other

I think it can be extracted from the main bios but i don't know how.

Post your bios backup here.There are enough experts here to extract EC from main bios.

[jasko_jacker]

Re: GL502VM Rev. 2.1 Keyboard Problem

I asked you this question because I asked for info on Vxxxxxx and the CEO did not know how to give me more info. I'm not sure, but I think that like ME, it programs itself automatically after programming the bios.

[lazaro.089]

Re: GL502VM Rev. 2.1 Keyboard Problem

I used one downloaded from Vinafix.
I haven't found any other

I think it can be extracted from the main bios but i don't know how.

[jasko_jacker]

Re: GL502VM Rev. 2.1 Keyboard Problem

are you sure you used the correct file for the keyboard controller?

[lazaro.089]

Re: GL502VM Rev. 2.1 Keyboard Problem

Yes, they work fine.
Keyboard is dead even in BIOS.

[caspian]

Re: GL502VM Rev. 2.1 Keyboard Problem

Do Touchpad and USB keyboard work fine with this laptop?

[lazaro.089]

Hi Everyone!
I have an Asus ROG Strix GL502VM (the mohterboard says GL502VM Rev. 2.1 but it has an i7-7XXX Proc. so I think it actually is GL502VMK idk...)

The problem is with the keyboard. The power button works but every other key doesn't.

What I tried:
-Check the keyboard with Vertyanov Keyboard tester (Everything seems fine)
-Re-programmed the EC chip ITE8171FN-56. (Didn't work, flashed ok but verification failed every time at 82%.)
-Replaced ITE8171FN-56
-Reprogrammed new ITE8171FN-56. (It flashed and verified ok but keyboard still dead)

I don't know if I need to check the main BIOS, maybe Main Bios is rewriting EC Section on boot to the ITE8171FN.

Any ideas?