I am looking for Apple Service Diagnostics

[piernov]

Re: I am looking for Apple Service Diagnostics

https://github.com/exelban/stats
Remember that CPU at 100°C is normal on modern laptops.

[MOMOS_GSM]

Re: I am looking for Apple Service Diagnostics

Try the following:

1) Power up but hold down the 'D' key and the Apple built in diags will kick in and report a simple status if a sensor has failed or not.

2) You can try TGPRO - free to test but ~$12 USD to buy it.

https://www.tunabellysoftware.com/tgpro/

Does your macbook work and you can see the display ?

Maybe you just need to remove the heatsink, scrape off the old (dry?) heatsink compound and apply a fresh batch ?

Also, be sure that the heatsink is indeed physically camped onto the top surface of the CPU / PCH or whatever to remove the heat.

Does your macbook work and you can see the display ?

yes macbook work and i see display normal

Maybe you just need to remove the heatsink, scrape off the old (dry?) heatsink compound and apply a fresh batch ?

Also, be sure that the heatsink is indeed physically camped onto the top surface of the CPU / PCH or whatever to remove the heat.

I'll follow your advice and let you know the results tomorrow.

when I put the motherboard under the thermal camera I have the T2 chip which heats up after it is the U7800 which heats up and after U7210

[mj.abellano]

Re: I am looking for Apple Service Diagnostics

Hi! I'm looking for a hardware test file for iMac (21.5-inch, Late 2013) .i think file name is asd 3s157 please help me thanks

[DanielDacko]

Re: I am looking for Apple Service Diagnostics

Hi! I'm looking for a hardware test file for iMac (21.5-inch, Late 2013) .i think file name is asd 3s157 please help me thanks

I hope this helps.

[ktmmotocross]

Re: I am looking for Apple Service Diagnostics

https://drive.google.com/file/d/0ByC...oyTDFnX1E/view

have u newer link? this one is dead. i need ASD for A1466/mid2017/ i think it is 3S171