Need help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Esse
    Badcaps Veteran
    • Apr 2014
    • 317
    • TOGO

    #1

    Need help

    MY car FORD FIESTER has a pad lock showing at the display and my car cannot start,any help please?
    what is a best programmer to program or unlock a car memory?
  • petehall347
    Badcaps Legend
    • Jan 2015
    • 4422
    • United Kingdom

    #2
    Re: Need help

    did you try jump starting it yet ?
    are you using correct key ?
    is chip still inside key ?

    Comment

    • Esse
      Badcaps Veteran
      • Apr 2014
      • 317
      • TOGO

      #3
      Re: Need help

      yes i using the correct key and the chip is inside

      Comment

      Related Topics

      Collapse

      • STKR123
        The right BIOS Programmer - The right software (HP Elitebook 820 G1, 840 G2) no soldering, EC, DMI, ME
        by STKR123
        Greetings badcaps community,

        I havent done this for a long time and want to start it all again, after some evil and annyoing illness.
        So I apologize in advance, if some phrases might sound a bit like gibberish or illogical to you.

        Im trying my best to fully describe what I plan to achieve and hope I was choosing the right sub-forum for my new adventure.

        I have a Elitebook 820 G1 and a Elitebook 840 G2 here.

        These ask for a password when entering the BIOS, but boot just fine from the internal SSD.

        I learned that desoldering...
        10-29-2024, 06:03 AM
      • narou21
        programmer for unlock bios Lenovo thinkpad 8th Gen and more
        by narou21
        Hi. how is the best programmer for unlock bios Lenovo thinkpad 8th Gen and more ..?
        thanks
        05-19-2022, 04:17 AM
      • Teeheeze
        RT809H Programmer Firmware Corrupted
        by Teeheeze
        This is a shot in the dark, but I was just using my RT809H programmer and it got stuck in a certain state so I power cycled it. Now, the device LED just flashes quickly and does not connect to the software. I've tried to update the BIOS of it and it fails. I went so far as to remove the ROM from the programmer itself but it's some weird chip (I believe ATMEL, but I can't find any datasheet on it) so I've been unable to read the BIN from it w/ my other programmer. Chip has ATMLHC4C56BM CN written on it (I think). I'll upload an image. I have the programmer's BIN ready to program it manually. Anyone...
        02-13-2025, 04:51 PM
      • H34TO
        ITE IT8390 (IT8390E-256) programmer "ITE Download Board 4" user manual + firmware, flashing ITE ECs on the cheap
        by H34TO
        Recently I've gotten into EC flashing due to my broken laptop(s) and started frantically searching methods for flashing the IT5571E-128 chip on the cheap(due to me beaing a student and not having a job) and noticed that ITE newer chips can be flashed via ISP (In-System Programming) either via SMBus or the KBC (EPP - Enhanced Parallel Port) interface. While these can be achieved with programmers like SVOD4/3 or the RT809H/F those options are WAYYY out of my budget so I was horrified. But recently I stumbled uppon some programmers on aliexpress that claim they can program a variety of ITE chips...
        06-17-2025, 07:17 AM
      • remizbushka
        Dell inspirion 5775 bios "Unlock Setup fail"
        by remizbushka
        Hi sirs. please help
        Dell Inspiron 5775 bios locked "Unlock Setup fail"


        After generating the Password Recovery code, I go to the “Security” tab - “Locked Settings” - it says “Unlock Settings? I tried many wrong passwords and it shows an error to unlock settings [ Press any key ].
        What I did:
        I read the bios dump.
        Downloaded the bios update to 1.6.0 from the official Dell website, extracted the dump from it, updated the bios, but the problem persisted. Please help me to solve the problem....
        03-24-2025, 09:07 AM
      • Loading...
      • No more items.
      Working...