Try our new boardview, bios, & schematic search. Over 1.3 million files for download!

how to properly or temporary fix hal sensor on hp victus 16-xxxx

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ktmmotocross
    Boardkiller
    • Feb 2014
    • 3697
    • slovakia
    • hard-enduro
    #1

    how to properly or temporary fix hal sensor on hp victus 16-xxxx

    On hp victus 16 it is know roblem hal sensor that starts failing when heated by gaming.
    as i see in some video it is on power switch board. i read about bad sensors in victus 16 0 series and series 1 have good sensors.
    for temporary fix can i just remove that sensor?
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • mitchw
      HP Victus 16 Hall Effect Sensor Problem
      by mitchw
      I am repairing a HP Victus 16 with black screen, blinking screen, etc. Quick googling provided me the answer that the lid detect hall sensor is the issue. Confirmed with disconnecting the IR board (that contains also the hall effect sensor). Laptop itself is just over a year old, but out of warranty.

      Apparently the sensor itself is a TCS40DLR, which fails after just months of use at elevated temperatures.
      Now which one is the best to replace with?
      Some suggested A1126LLHLT-T, but they had to modify the power supply to supply the 3.3V instead of 1.8V, as the sensor wasn't...
      02-12-2026, 11:33 AM
    • jasonr2000
      Macbook Pro 16" 2019 No Display After Lid Sensor Issue
      by jasonr2000
      hi guys i have the above MacBook pro 2019 16"

      i did some dust cleaning recently and i somehow damaged the lid angle sensor. so i purchased the nerdtool1 lid angle sensor calibrating tool and a new sensor.

      installed it and followed the instructions to program the sensor.

      and now im still getting no display out of the MacBook pro.

      its booting up ok ive noticed the keyboard and touchbar is all lighting up.

      it was also showing a display before i replaced the damaged sensor and now i cant get any display out of it.

      ...
      02-18-2026, 01:54 PM
    • serwanjaf7
      hp victus (la-m787p) hall sensor problem
      by serwanjaf7
      hello friends
      pls i need help with hp vicuts it have problem on the hall sensor i want to change it bu i dont find and i dont now what is the part no
      pls need help
      thank you...
      12-08-2025, 01:23 AM
    • Gruvytune
      Projector focus motor sensor
      by Gruvytune
      Hi.

      I have a formovie xming v1 ultra projector.

      The focusing sensor circuit for lens travel position isn't working. It's a new unit and it goes to either end of travel and keeps clicking and won't reverse direction.

      The focusing itself works as long as it operates in the middle range of lens position.




      Here’s the siste summary
      • The Problem: The focus motor will not stop or reverse at the ends of travel. It stalls and clicks violently. This exact behavior happened on the original factory motor before it stripped, and it happens
      ...
      Today, 06:13 AM
    • CG2
      Meaco Arete One / Deye Dehumidifier not working
      by CG2
      I've got a dehumidifier that has stopped working. Plug it in, press the power switch, and it beeps 5 times. Nothing showing in the display (which is just two 7 segment displays) apart from the two decimal points flashing. The model is a MeacoDry Arete One 18L, which seems to be a rebadged Deye (all the boards are marked Deye). Here's what I've got so far (details in case anyone else in future should need them).

      Starting with the power board. Mains power comes in at the red connector top left. The compressor is powered by the orange connector to the right of that and is switched by...
      Power Board Front
      5 Photos
      08-17-2024, 07:47 AM
    • Loading...
    • No more items.
    Working...