Huawei matte DAH98AMBAD0 search EC file

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • PacoGT
    Senior Member
    • Sep 2022
    • 116
    • Guatemala

    #1

    Huawei matte DAH98AMBAD0 search EC file

    Hi, I'm looking for a copy of the EC chip. I replaced it on a motherboard that had the EC chip, but it seems the first one in the laptop was programmable. It overheated, and even after replacing it, it still won't turn on. I suppose it needs to be programmed.

    I've already searched on Google and this forum, but I haven't found a copy of the EC chip. If nobody has it, I suppose I'll have to buy it on eBay or AliExpress, since I saw that they sell this chip already programmed there.
  • mon2
    Badcaps Legend
    • Dec 2019
    • 14833
    • Canada

    #2
    For EC dumps, etc. - please post inside the BIOS sub-forum. See above. Someone there should be able to assist you.

    Comment

    Related Topics

    Collapse

    • maanee11
      Looking for BIOS flash file for HUAWEI MateBook X Pro 2019 (MACH-WX9)
      by maanee11
      Hello Everyone,

      I have HUAWEI MateBook X Pro 2019 (MACH-WX9) whose BIOS got corrupted i beleive. I have acquired Ch341A SPI flasher to program the BIOS externally. I see that to program the BIOS, i need BIOS bin/hex file which i could use to reflash it externally via the flasher tool.

      It seems like the support page of this model no longer exist: https://consumer.huawei.com/be/lapto...ro-2019/specs/

      In the website, you can only see specs etc.

      I have not tried to extract the BIOS dump yet as I want to see if there is any ray of sunshine...
      11-08-2025, 04:08 AM
    • m1ch43lzm
      Notice to users of XGecu TL866II Plus / T48 / T56 / T76 programmers regarding BIOS backup file size
      by m1ch43lzm
      Hi everyone
      I noticed on the Xgpro software the BIOS backup files have extra bytes at the end when reading some chips, this is because the Xgpro software also reads the OTP region of those flash chips, and by default will append that region to the saved file
      Programmer models: XGecu TL866II Plus / T48 / T56 / T76

      Example: GD25LQ128D (1.8V), IC size is listed as 0x1000000 Bytes (16777216 bytes) + 0xC00 bytes, those extra 0xC00 bytes will be appended to the end of the saved file by default, resulting in a file size of 16780288 bytes
      There's also an extra OTP Secu.R...
      09-06-2025, 05:47 PM
    • ChrisLannie15
      Huawei Matebook D 15 2021 Intel bios bin/file
      by ChrisLannie15
      Hello is there anyone that has bios bin/file for Huawei Laptop
      It's cpu is Intel core i3 10th generation 8gb ram.
      MB Model: dah98mb38b0 rev b hf
      MB: H98
      BOB-WAI9 Model number

      I don't have the serial number cause the sticker got scratched but here's my backup bin.

      Please fix capslock and fn always on and no display. Need it asap. Thankyousomuch.

      The admin removed attached files [MOD EDIT] Read the rules,no external links ! ,you`ve already received multiple infractions and been given the link to the rules, try reading them !! the so...
      01-17-2024, 05:29 PM
    • ROONEY50
      Huawei Matebook D14 NBL-WAP9R (DAH98AMBAD0)
      by ROONEY50
      Hi.

      I'm learning about fixing computers and have received a dead Huawei D14. It has a nearly fully charged battery in it (16.5v) but no charger(USB-C). Without the battery connected, these are the ohm readings I'm getting.

      3.3v coil - 25 ohms
      5v coil - OL
      The other 3 coils on the board are showing

      250 ohms
      45.3 ohms
      4000 mega ohms

      I'm assuming the 3v is shorted maybe?

      When I power the laptop on, it shows as dead. No CPU heat, no picture and no fan. However I noticed the 3.3v and 5v coils are showing the right...
      10-10-2025, 12:56 PM
    • DrFalken
      Huawei Magicbook m/b DAH98AMBAD0, dead
      by DrFalken
      Just arrived a Magicbook with m/b DAH98AMBAD0 completely dead, power LED stay OFF.
      Checking with thermal camera I see a chip labeled 4GA "pulsating".
      4GA code point me to "FT521GAb"="LDO, Dual out, Vout1/Vout2=2.8V/1.2V±2%, 250mA, +CE"
      Maybe something is shorting it ?
      What can I check ?
      Can't find it on the attached schematics - https://www.badcaps.net/forum/troubl...atebook-no-cha...
      03-30-2023, 02:58 AM
    • Loading...
    • No more items.
    Working...