I have a Acer nitro V15 ANV15-41-R2MS, can boot into bios, the temperature in bios show as close to 80C(going up in 1 mins), Vcore is about 1.02v, initial boot, one buck regulator and coil are much hotter than other,
then all of them become hotter, same for CPU. The heatsink and paste look good, the fan run loudly.
I am new in laptop repairing, is it normal as I heard CPU phase-shedding, so when starting boot, there maybe only one buck regulator providing power.
If that’s normal, then is it possible CPU internal short. All resistance from coil to ground looks normal, 3.2O.
Any suggestions is appreciated.
then all of them become hotter, same for CPU. The heatsink and paste look good, the fan run loudly.
I am new in laptop repairing, is it normal as I heard CPU phase-shedding, so when starting boot, there maybe only one buck regulator providing power.
If that’s normal, then is it possible CPU internal short. All resistance from coil to ground looks normal, 3.2O.
Any suggestions is appreciated.