Hello,
Acer Aspire 5 A515-57 HH5A4 LA-M211P rev 1A
CPU: SRLFQ i5-1235U
KBC: KB9052QD
The laptop boots without displaying a picture on either the display or the external screen. After resetting the CMOS, the board restarts twice, current flows, and then the board randomly stops at 0.887A or 0.999A. The battery charges.
PLB2 - 1,2 MΩ and growing
PLG4 - 15 Ω
PLZ1 - 8 Ω
PLZ2 - 8 Ω
PLA01 - 15 Ω
PL1801 - 2 kΩ
PL501 - 1,5 kΩ
PLM2 - 62 Ω
PL301 - 1,5 kΩ
After turn on
PLB2 - 225 mV
PLG4 - 0V
PLZ1 - 1.1V
PLZ2 - 1.1V
PLA01 - 1,8V
PL1801 - 1,8V
PL501 - 5V
PLM2 - 1,2V
PL301 - 3,3V
I'll also add that practically the motherboard itself boots without any additional accessories. The RAM is tested and working. The BIOS and KBC firmware have been reprogrammed.
Acer Aspire 5 A515-57 HH5A4 LA-M211P rev 1A
CPU: SRLFQ i5-1235U
KBC: KB9052QD
The laptop boots without displaying a picture on either the display or the external screen. After resetting the CMOS, the board restarts twice, current flows, and then the board randomly stops at 0.887A or 0.999A. The battery charges.
PLB2 - 1,2 MΩ and growing
PLG4 - 15 Ω
PLZ1 - 8 Ω
PLZ2 - 8 Ω
PLA01 - 15 Ω
PL1801 - 2 kΩ
PL501 - 1,5 kΩ
PLM2 - 62 Ω
PL301 - 1,5 kΩ
After turn on
PLB2 - 225 mV
PLG4 - 0V
PLZ1 - 1.1V
PLZ2 - 1.1V
PLA01 - 1,8V
PL1801 - 1,8V
PL501 - 5V
PLM2 - 1,2V
PL301 - 3,3V
I'll also add that practically the motherboard itself boots without any additional accessories. The RAM is tested and working. The BIOS and KBC firmware have been reprogrammed.