NTB Asus E406MA. NTB worked great, but one day it wouldn't turn on. After pressing the button on the keyboard, nothing happened (just darkness). Since the NTB does not have a CMOS battery, disk (eMMC) and RAM integrated on the motherboard, I disconnected the large battery and connected the NTB to a 19V adapter. After pressing the button on the keyboard, nothing happened (just darkness).
I measured the voltage on the MB and found that it was fine, 19V (see picture).
I would also like to check if the power button is fine, but I can't find the correct pins on the keyboard connector.
Could you please advise me?
I measured the voltage on the MB and found that it was fine, 19V (see picture).
I would also like to check if the power button is fine, but I can't find the correct pins on the keyboard connector.
Could you please advise me?
Attached Files