BQ24800 to can it be replaced with these parts BQ24780S

[lorins_core]

not yet. i hold for now...

[mcplslg123]

BQ24780S is suitable replacement for 24800. the IC has burnt for some other reason. You need to remove the charging IC and share resistance to GND on each and every pin of charging IC

[mon2]

OMG - yet the TI forum (FAE) states the 2 devices are pin-for-pin compatible with each other.

From the pinout - they look to be compatible as mentioned in the TI forum. Could there be another fault on the logic board?

[lorins_core]

The ‘R' has a few more features than the ‘S' version. If the software makes use of the extra registers then no it will not work. However the parts are drop in replacements for each other so no harm to test it if the part is available to you.

Continue to post your updates.

Here is happening hahahaha. - Negative 4

[mon2]

The ‘R' has a few more features than the ‘S' version. If the software makes use of the extra registers then no it will not work. However the parts are drop in replacements for each other so no harm to test it if the part is available to you.

Continue to post your updates.

[lorins_core]

Found this:

https://e2e.ti.com/support/power-man...20and%20800kHz.

Master My Questions can be okay if I replace the BQ24800RUYR part. for this BQ24780SRUYR? Do they have no problem with the system board or bad effects?

[mon2]

Found this:

https://e2e.ti.com/support/power-man...20and%20800kHz.

[lorins_core]

Hello to all.

may I have a question about these Semiconductor parts BQ24800RUYR? can it be replaced with these parts BQ24780SRUYR?

I need some good advice and also some information about it. thank you and God Bless...